Difference between revisions of "IP Heavy Duty Station"
From Zenitel Wiki
(→Configuration) |
|||
| Line 8: | Line 8: | ||
General configuration: | General configuration: | ||
| − | * [[IP Station Configuration - AlphaCom mode]] | + | * [[IP Station Configuration - ICX-AlphaCom mode]] |
* [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]] | * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]] | ||
* [[SIP Intercom Configuration|IP Station Configuration - SIP mode]] | * [[SIP Intercom Configuration|IP Station Configuration - SIP mode]] | ||
Revision as of 13:23, 19 November 2020
Contents
Connections
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
General configuration:
- IP Station Configuration - ICX-AlphaCom mode
- IP Station Configuration - Edge mode
- IP Station Configuration - SIP mode
- IP Station Configuration - Pulse mode
Station specific configuration for the IP Heavy Duty station:
- Configuration of IP Heavy Duty station - AlphaCom mode
- Configuration of IP Heavy Duty station - Pulse mode
- Configuration of IP Heavy Duty station - SIP mode
Restore Factory Defaults and Software Upgrade
- Restore factory default settings
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
Connectors, Indicators and Dimensions
Software Requirements
This station is fully supported as form AlphaCom version 10.20