Touchless sensor (w/ backbox): Difference between revisions
From Zenitel Wiki
No edit summary |
|||
| Line 30: | Line 30: | ||
=== Configuration on IC-Edge === | === Configuration on IC-Edge === | ||
To configure the | To configure the Input select '''Edge Controller''' > '''System Configuration''' > '''Direct Access Keys'''. <br> | ||
Select '''Show/Hide Settings''' on the station you want to configure: | Select '''Show/Hide Settings''' on the station you want to configure: | ||
[[File:TouchLess Inp1 Edge.PNG|thumb|500px|left|Input 1 configured to call number 13 when triggered]] | [[File:TouchLess Inp1 Edge.PNG|thumb|500px|left|Input 1 configured to call number 13 when triggered]] | ||
Revision as of 14:06, 17 March 2021
The Touchless sensor (item 2390020100) is an IR-sensor that connects to Turbine Compact stations and is used to activate calls with gesture recognition instead of pressing the call button.
Highlights
- Input Voltage: 5V
- Available contacts: Normally Open & Normally Closed
- Sensor active time: 0,5 secs
- Operating distance: 15cm
- IP66
Connections
Connections are made to the switch using the supplied 5 pin plug.
Correct orientation of the plug is ensured by the connector locating guides.
Color code
- Red - +5 Volt supply
- Brown - 0 Volt supply
- Green - Normally Closed
- Blue - Common
- Purple - Normally Open
Typical Application
Use Case Examples
Touchless sensor wired to Input 1 on a Turbine station:
Configuration on IC-Edge
To configure the Input select Edge Controller > System Configuration > Direct Access Keys.
Select Show/Hide Settings on the station you want to configure:
Configure the Input to Call To a directory number when activated.
More details can be found on Direct Access Key Settings.
Configuration on ICX-AlphaCom
Configuration of Inputs and Direct Access Keys (DAK) are done in AlphaPro.
Detailed information is found under DAK programming.