Difference between revisions of "IND - Indicator control for CRMIV LEDs, buzzer etc."
From Zenitel Wiki
m |
ZenitelAus (talk | contribs) (Tag: Visual edit) |
||
Line 1: | Line 1: | ||
{{AI}} | {{AI}} | ||
The IND (INDication) or GIND action are used in the [[Event Handler]] for sending commands to a station or a group of stations. The following stations are supporting the IND command: | The IND (INDication) or GIND action are used in the [[Event Handler]] for sending commands to a station or a group of stations. The following stations are supporting the IND command: | ||
− | * [[IP Flush Master - 1008031000|IP Flush Master and CRM V]]: Control the LED's in the DAK keys | + | |
− | * [[Control Room Master IV|CRM IV]]: Control the LED's in the DAK keys, the internal buzzer or relay, and the backlight of the display | + | *[[IP Flush Master - 1008031000|IP Flush Master and CRM V]]: Control the LED's in the DAK keys |
− | * [[Dual Display Station - 1007007000|DualDisplay station]]: Control the video-state of the DAK-display | + | *[[Control Room Master IV|CRM IV]]: Control the LED's in the DAK keys, the internal buzzer or relay, and the backlight of the display |
− | * [[Tamper and Vandal Proof Station - 1007063000|Priscom station]]: Control the outputs used for lamps, cell light, call LED and spare output | + | *[[Dual Display Station - 1007007000|DualDisplay station]]: Control the video-state of the DAK-display |
− | * [[IP-ARIO]]: Control the Error LED and the Radio LED | + | *[[Tamper and Vandal Proof Station - 1007063000|Priscom station]]: Control the outputs used for lamps, cell light, call LED and spare output |
− | * IP Substation: Control relay and spare output | + | *[[IP-ARIO]]: Control the Error LED and the Radio LED |
− | * Turbine station: Control relay and the 6 additional outputs | + | *IP Substation: Control relay and spare output |
− | * [[ECPIR-3P]] and [[EBMDR-8]] module | + | *Turbine station: Control relay and the 6 additional outputs |
+ | *[[ECPIR-3P]] and [[EBMDR-8]] module | ||
{{note|Note: Using the IND command also triggers a ST_STATE message on the OPC port; it is advisable to add two (or possibly more, depending on the system load) PAUSE commands before the IND command, especially when the event trigger is event 7, 8 or 44, When Change To OFF}} | {{note|Note: Using the IND command also triggers a ST_STATE message on the OPC port; it is advisable to add two (or possibly more, depending on the system load) PAUSE commands before the IND command, especially when the event trigger is event 7, 8 or 44, When Change To OFF}} | ||
− | == Command syntax == | + | ==Command syntax== |
'''IND command:''' | '''IND command:''' | ||
{{code|IND <station phys.no> <output> <LED no/buzzer> <Ind-type> [state]}} | {{code|IND <station phys.no> <output> <LED no/buzzer> <Ind-type> [state]}} | ||
Line 20: | Line 21: | ||
'''GIND command:''' | '''GIND command:''' | ||
{{code|GIND <group ind> <output> <LED no/buzzer> <Ind-type> [state] }} | {{code|GIND <group ind> <output> <LED no/buzzer> <Ind-type> [state] }} | ||
+ | |||
:<group ind> is the AlphaCom group index number 1-250. (Not the group directory number) | :<group ind> is the AlphaCom group index number 1-250. (Not the group directory number) | ||
Line 34: | Line 36: | ||
! style="background:#ffdead;" width="80" |[state] | ! style="background:#ffdead;" width="80" |[state] | ||
|- | |- | ||
− | | | + | | valign="top" align="center" |'''CRM V and IP Flush Master (8024)''' |
− | | | + | | valign="top" align="center" |1 - 552 |
− | |valign="top" |1-100 = DAK-key number | + | | valign="top" |1-100 = DAK-key number |
− | |valign="top" |1 = Red LED <br> | + | | valign="top" |1 = Red LED <br> |
− | 2 = Green LED <br> | + | 2 = Green LED <br> |
− | |valign="top" |1 = continuous (low priority) <br> | + | | valign="top" |1 = continuous (low priority) <br> |
2 = slow flash (medium priority) <br> | 2 = slow flash (medium priority) <br> | ||
− | 3 = fast flash (high priority) <br> | + | 3 = fast flash (high priority) <br> |
− | |valign="top" |ON or OFF | + | | valign="top" |ON or OFF |
|- | |- | ||
− | | | + | | valign="top" align="center" |'''IP Substation (8022)''' |
− | | | + | | valign="top" align="center" |1 - 552 |
− | |valign="top" |1 = Relay <br> 2 = Spare output | + | | valign="top" |1 = Relay <br> 2 = Spare output |
− | |valign="top" |Always "1"<br> | + | | valign="top" |Always "1"<br> |
− | |valign="top" |1 = continuous (low priority) <br> | + | | valign="top" |1 = continuous (low priority) <br> |
2 = slow flash (medium priority) <br> | 2 = slow flash (medium priority) <br> | ||
− | 3 = fast flash (high priority) <br> | + | 3 = fast flash (high priority) <br> |
− | |valign="top" |ON or OFF | + | | valign="top" |ON or OFF |
|- | |- | ||
− | | | + | | valign="top" align="center" |'''Turbine station''' |
− | | | + | | valign="top" align="center" |1 - 552 |
− | |valign="top" |17 = Relay <br> 11-16 = Spare outputs<br> ''See note below!'' | + | | valign="top" |17 = Relay <br> 11-16 = Spare outputs<br> ''See note below!'' |
− | |valign="top" |Always "1"<br> | + | | valign="top" |Always "1"<br> |
− | |valign="top" |1 = continuous (low priority) <br> | + | | valign="top" |1 = continuous (low priority) <br> |
2 = slow flash (medium priority) <br> | 2 = slow flash (medium priority) <br> | ||
− | 3 = fast flash (high priority) <br> | + | 3 = fast flash (high priority) <br> |
− | |valign="top" |ON or OFF | + | | valign="top" |ON or OFF |
|- | |- | ||
− | | | + | | valign="top" align="center" |'''IP-LCM''' |
− | | | + | | valign="top" align="center" |1 - 552 |
− | |valign="top" |17 = Relay <br> 11-16 = Spare outputs <br> 27-34 = external relays <br> ''See note below!'' | + | | valign="top" |17 = Relay <br> 11-16 = Spare outputs <br> 27-34 = external relays <br> ''See note below!'' |
− | |valign="top" |Always "1"<br> | + | | valign="top" |Always "1"<br> |
− | |valign="top" |1 = continuous (low priority) <br> | + | | valign="top" |1 = continuous (low priority) <br> |
2 = slow flash (medium priority) <br> | 2 = slow flash (medium priority) <br> | ||
− | 3 = fast flash (high priority) <br> | + | 3 = fast flash (high priority) <br> |
− | |valign="top" |ON or OFF | + | | valign="top" |ON or OFF |
|- | |- | ||
− | | | + | | valign="top" align="center" |'''ECPIR-3P''' |
− | | | + | | valign="top" align="center" |1 - 552 |
− | |valign="top" |513 = Fault LED<br> ''Requires AMC 13.1.x.x'' | + | | valign="top" |1-100 = DAK-key number |
− | |valign="top" |Always "1"<br> | + | |
− | |valign="top" |1 = continuous (low priority) <br> | + | |
+ | |||
+ | |||
+ | 513 = Fault LED<br> ''Requires AMC 13.1.x.x'' | ||
+ | | valign="top" |1 = Red LED <br>2 = Green LED | ||
+ | |||
+ | |||
+ | |||
+ | Always "1"<br> | ||
+ | | valign="top" |1 = continuous (low priority) <br> | ||
2 = slow flash (medium priority) <br> | 2 = slow flash (medium priority) <br> | ||
− | 3 = fast flash (high priority) <br> | + | 3 = fast flash (high priority) <br> |
− | |valign="top" |ON or OFF | + | | valign="top" |ON or OFF |
|- | |- | ||
− | | | + | | valign="top" align="center" |'''DualDisplay''' |
− | | | + | | valign="top" align="center" |1 - 552 |
− | | valign="top"|1-100 = The DAK-key line | + | | valign="top" |1-100 = The DAK-key line |
− | |valign="top" | Always "1" | + | | valign="top" |Always "1" |
− | |valign="top" |Video-state of the DAK-display: <br> | + | | valign="top" |Video-state of the DAK-display: <br> |
− | :0 = Normal <br> | + | |
− | :1 = Inverse <br> | + | :0 = Normal <br> |
− | :2 = Slow flash <br> | + | :1 = Inverse <br> |
− | :3 = Fast flash <br> | + | :2 = Slow flash <br> |
− | |valign="top" |ON or OFF | + | :3 = Fast flash <br> |
+ | | valign="top" |ON or OFF | ||
|- | |- | ||
− | | | + | | valign="top" align="center" |'''IP-ARIO''' |
− | | | + | | valign="top" align="center" |1 - 552 |
− | |valign="top" |1 = Radio LED <br> 2 = Error LED | + | | valign="top" |1 = Radio LED <br> 2 = Error LED |
− | |valign="top" |1 = Red LED (Radio and Error) <br> | + | | valign="top" |1 = Red LED (Radio and Error) <br> |
− | 2 = Green LED (Radio LED only)<br> | + | 2 = Green LED (Radio LED only)<br> |
− | |valign="top" |1 = continuous (low priority) <br> | + | | valign="top" |1 = continuous (low priority) <br> |
2 = slow flash (medium priority) <br> | 2 = slow flash (medium priority) <br> | ||
− | 3 = fast flash (high priority) <br> | + | 3 = fast flash (high priority) <br> |
− | |valign="top" |ON or OFF | + | | valign="top" |ON or OFF |
|- | |- | ||
− | | | + | | valign="top" align="center" |'''PrisCom''' |
− | | | + | | valign="top" align="center" |1 - 552 |
− | | valign="top"|1 - 4 = Lamp outputs <br> 5 - 6 = Spare outputs <br> 7 = Relay (Cell light) <br> 8 = Call LED | + | | valign="top" |1 - 4 = Lamp outputs <br> 5 - 6 = Spare outputs <br> 7 = Relay (Cell light) <br> 8 = Call LED |
− | |valign="top" | Always "1" | + | | valign="top" |Always "1" |
− | |valign="top" |1 = continuous (low priority) <br> | + | | valign="top" |1 = continuous (low priority) <br> |
2 = slow flash (medium priority) <br> | 2 = slow flash (medium priority) <br> | ||
− | 3 = fast flash (high priority) <br> | + | 3 = fast flash (high priority) <br> |
− | |valign="top" |ON or OFF | + | | valign="top" |ON or OFF |
|- | |- | ||
− | | | + | | valign="top" align="center" |'''CRM IV''' |
− | | | + | | valign="top" align="center" |1 - 552 |
− | | valign="top"|1-100 = DAK-key number<br> 1023 = Buzzer <br> 1024 = Display backlight<br> | + | | valign="top" |1-100 = DAK-key number<br> 1023 = Buzzer <br> 1024 = Display backlight<br> |
− | |valign="top" | DAK-key: <br> | + | | valign="top" |DAK-key: <br> |
− | :1 = Red LED <br> | + | |
− | :2 = Green LED <br> | + | :1 = Red LED <br> |
+ | :2 = Green LED <br> | ||
+ | |||
Buzzer: <br> | Buzzer: <br> | ||
− | :1 = Internal buzzer <br> | + | |
− | :2 = External buzzer (relay) <br> | + | :1 = Internal buzzer <br> |
+ | :2 = External buzzer (relay) <br> | ||
+ | |||
Display backlight: <br> | Display backlight: <br> | ||
− | :1 = Backlight | + | |
− | |valign="top" |DAK LED's: <br> | + | :1 = Backlight |
− | :1 = continuous (low priority) <br> | + | | valign="top" |DAK LED's: <br> |
− | :2 = slow flash (medium priority) <br> | + | |
− | :3 = fast flash (high priority) <br> | + | :1 = continuous (low priority) <br> |
+ | :2 = slow flash (medium priority) <br> | ||
+ | :3 = fast flash (high priority) <br> | ||
+ | |||
Buzzers: <br> | Buzzers: <br> | ||
− | :1 = 1 bleep per 8 seconds (low priority) <br> | + | |
− | :2 = 1 bleep per 2 seconds (medium priority) <br> | + | :1 = 1 bleep per 8 seconds (low priority) <br> |
− | :3 = 4 bleeps per second (high priority) <br> | + | :2 = 1 bleep per 2 seconds (medium priority) <br> |
+ | :3 = 4 bleeps per second (high priority) <br> | ||
:4 = continuous (alarm priority) | :4 = continuous (alarm priority) | ||
+ | |||
Display backlight: <br> | Display backlight: <br> | ||
− | :1 = continuous | + | |
− | |valign="top" |ON or OFF | + | :1 = continuous |
+ | | valign="top" |ON or OFF | ||
|- | |- | ||
|} | |} | ||
Line 143: | Line 165: | ||
* ''AMC version 11.2.3.11 and later: Use IND numbers 11 - 17'' }} | * ''AMC version 11.2.3.11 and later: Use IND numbers 11 - 17'' }} | ||
− | == Related articles == | + | ==Related articles== |
− | * [[Control_Room_Master_IV#Configuration|CRM IV: LED and buzzer control]] | + | |
− | * [[CRM IV: Indicate status of remote stations in AlphaNet]] | + | *[[Control_Room_Master_IV#Configuration|CRM IV: LED and buzzer control]] |
− | * [[RCO - Remote Control Output]] | + | *[[CRM IV: Indicate status of remote stations in AlphaNet]] |
− | * [[SET_IPRCO|$SET_IPRCO]]: This data command can be used to activate Remote Control Outputs on IP Stations and IPARIO without having to define the RCO's in the RCO table. | + | *[[RCO - Remote Control Output]] |
+ | *[[SET_IPRCO|$SET_IPRCO]]: This data command can be used to activate Remote Control Outputs on IP Stations and IPARIO without having to define the RCO's in the RCO table. | ||
[[Category:Event Handler]] | [[Category:Event Handler]] | ||
[[Category:Built-In Action Commands]] | [[Category:Built-In Action Commands]] |
Revision as of 07:48, 20 July 2021
The IND (INDication) or GIND action are used in the Event Handler for sending commands to a station or a group of stations. The following stations are supporting the IND command:
- IP Flush Master and CRM V: Control the LED's in the DAK keys
- CRM IV: Control the LED's in the DAK keys, the internal buzzer or relay, and the backlight of the display
- DualDisplay station: Control the video-state of the DAK-display
- Priscom station: Control the outputs used for lamps, cell light, call LED and spare output
- IP-ARIO: Control the Error LED and the Radio LED
- IP Substation: Control relay and spare output
- Turbine station: Control relay and the 6 additional outputs
- ECPIR-3P and EBMDR-8 module
Command syntax
IND command:
IND <station phys.no> <output> <LED no/buzzer> <Ind-type> [state]
|
Example: On station 2, key 23, turn green led, fast flashing, ON
IND 2 23 2 3 ON
|
GIND command:
GIND <group ind> <output> <LED no/buzzer> <Ind-type> [state]
|
- <group ind> is the AlphaCom group index number 1-250. (Not the group directory number)
There must be a space between the command parameters.
Parameter description:
Station/Parameter | phys. number | output | LED no/buzzer | IND-type | [state] |
---|---|---|---|---|---|
CRM V and IP Flush Master (8024) | 1 - 552 | 1-100 = DAK-key number | 1 = Red LED 2 = Green LED |
1 = continuous (low priority) 2 = slow flash (medium priority) |
ON or OFF |
IP Substation (8022) | 1 - 552 | 1 = Relay 2 = Spare output |
Always "1" |
1 = continuous (low priority) 2 = slow flash (medium priority) |
ON or OFF |
Turbine station | 1 - 552 | 17 = Relay 11-16 = Spare outputs See note below! |
Always "1" |
1 = continuous (low priority) 2 = slow flash (medium priority) |
ON or OFF |
IP-LCM | 1 - 552 | 17 = Relay 11-16 = Spare outputs 27-34 = external relays See note below! |
Always "1" |
1 = continuous (low priority) 2 = slow flash (medium priority) |
ON or OFF |
ECPIR-3P | 1 - 552 | 1-100 = DAK-key number
|
1 = Red LED 2 = Green LED
Always "1" |
1 = continuous (low priority) 2 = slow flash (medium priority) |
ON or OFF |
DualDisplay | 1 - 552 | 1-100 = The DAK-key line | Always "1" | Video-state of the DAK-display:
|
ON or OFF |
IP-ARIO | 1 - 552 | 1 = Radio LED 2 = Error LED |
1 = Red LED (Radio and Error) 2 = Green LED (Radio LED only) |
1 = continuous (low priority) 2 = slow flash (medium priority) |
ON or OFF |
PrisCom | 1 - 552 | 1 - 4 = Lamp outputs 5 - 6 = Spare outputs 7 = Relay (Cell light) 8 = Call LED |
Always "1" | 1 = continuous (low priority) 2 = slow flash (medium priority) |
ON or OFF |
CRM IV | 1 - 552 | 1-100 = DAK-key number 1023 = Buzzer 1024 = Display backlight |
DAK-key:
Buzzer:
Display backlight:
|
DAK LED's:
Buzzers:
Display backlight:
|
ON or OFF |
The state parameter is optional. If nothing is entered in this field, the indication is switched on/off along with the event. By entering OFF, for example, you can set an indication to turn off when the event turns on.
Related articles
- CRM IV: LED and buzzer control
- CRM IV: Indicate status of remote stations in AlphaNet
- RCO - Remote Control Output
- $SET_IPRCO: This data command can be used to activate Remote Control Outputs on IP Stations and IPARIO without having to define the RCO's in the RCO table.