Difference between revisions of "Starting Up Turbine Station"
From Zenitel Wiki
(→How to find the IP Address of the station) |
|||
| Line 1: | Line 1: | ||
{{AEIPS}} | {{AEIPS}} | ||
[[File:TurbineStartingUp.PNG|thumb|right|400px|Connecting the PC and the station to a network switch]] | [[File:TurbineStartingUp.PNG|thumb|right|400px|Connecting the PC and the station to a network switch]] | ||
| − | The [[:Category:Stations#Turbine_stations| | + | The [[:Category:Stations#Turbine_stations|Zenitel IP devices]] feature an embedded web interface, which allows users to log in using a standard web browser. |
| − | To | + | To access the IP device, your PC and the device have to be connected to a PoE switch using network cables: |
# Connect the PC to a port on the network switch | # Connect the PC to a port on the network switch | ||
| − | # Connect the | + | # Connect the deviceto a PoE port on the network switch |
| − | When the | + | When the IP device is connected to the network, the '''IP address''' of the device is automatically obtained in one of two ways: |
| − | # An IP address is obtained from a '''DHCP server''' if there is one. | + | # An IP address is automatically obtained from a '''DHCP server''' if there is one. |
# If there is no DHCP server, a random IP address in the range '''169.254.x.x''' will be assigned. | # If there is no DHCP server, a random IP address in the range '''169.254.x.x''' will be assigned. | ||
<br> | <br> | ||
| − | == How to find the IP Address of | + | == How to find the IP Address of a device == |
| − | If the | + | If the device is not registered to a server, it will speak its own IP address when you press the '''Call button''', a '''Digit key''' a '''DAK key''' or activate an '''Input'''. |
| − | |||
| − | |||
During commissioning, the station must be set to operate in the required mode. There are three modes of operation: | During commissioning, the station must be set to operate in the required mode. There are three modes of operation: | ||
| Line 23: | Line 21: | ||
* '''SIP mode''' - the station will register to a SIP server | * '''SIP mode''' - the station will register to a SIP server | ||
* '''Edge mode''' - the station will register to a Edge server | * '''Edge mode''' - the station will register to a Edge server | ||
| + | |||
| + | The default mode from factory is "Edge" mode. | ||
[[Category: Turbine - Restore Factory Defaults and Software Upgrade]] | [[Category: Turbine - Restore Factory Defaults and Software Upgrade]] | ||
Revision as of 10:17, 21 September 2021
The Zenitel IP devices feature an embedded web interface, which allows users to log in using a standard web browser.
To access the IP device, your PC and the device have to be connected to a PoE switch using network cables:
- Connect the PC to a port on the network switch
- Connect the deviceto a PoE port on the network switch
When the IP device is connected to the network, the IP address of the device is automatically obtained in one of two ways:
- An IP address is automatically obtained from a DHCP server if there is one.
- If there is no DHCP server, a random IP address in the range 169.254.x.x will be assigned.
How to find the IP Address of a device
If the device is not registered to a server, it will speak its own IP address when you press the Call button, a Digit key a DAK key or activate an Input.
During commissioning, the station must be set to operate in the required mode. There are three modes of operation:
- ICX-AlphaCom mode - the station will register to an AlphaCom server
- SIP mode - the station will register to a SIP server
- Edge mode - the station will register to a Edge server
The default mode from factory is "Edge" mode.