Difference between revisions of "ITSV-1"

Latest revision as of 09:26, 18 March 2022

This product is discontinued!

IP Phone ITSV-1 (1490001010)

This product is replaced by ITSV-2

Getting Started

Installing the Phone with Wall Mount

Attach the wall mount to the slots on the back of the phone.
Attach the phone to the wall via the wall mount hole.
Pull out the tab from the handset cradle (see figure below).
Rotate the tab and plug it back into the slot with the extension up to hold the handset while the phone is mounted on the wall.

Installing the Phone with Phone Stand

Attach the phone stand to the back of the phone where there are slots for mounting. The upper and bottom slots enable mounting at two different angles.

Connecting the phone

Connect the handset and main phone case with the phone cord.
Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable.
If you have a compatible power adapter, connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an electrical outlet. (If PoE switch is used in step 2, this step could be skipped.)
The LCD will display booting up or firmware upgrading information. Before continuing, please wait for the main screen display to appear.
Using the web configuration interface or the menu of the touch screen, you can further configure network connection using static IP, DHCP, etc.

Configuration

The IP phone can only operate in SIP mode. Choose one of the links below depending on what kind of server the station should register to.

Restore Factory Defaults and Software Upgrade

Dimensions

Phone dimensions

Front view

Right view

Rear view

Bracket dimensions

Phone stand

Wall mount bracket

Related information

Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-{{AEPS}}
+{{Obsolete}}
-[[Image:ITSV-1.png|thumb|300px|IP Phone ITSV-1 (149 0001 010)]]
+{{AEIPS}}
+[[Image:ITSV-1.png|thumb|300px|IP Phone ITSV-1 (1490001010)]]
+This product is replaced by [[ITSV-2]]
 == Getting Started ==
@@ Line 33: / Line 36: @@
 * [[ITSV-1 (Edge)|ITSV-1 Configuration - Edge mode]]
-==Reset to Factory Default==
-===Restore to Factory Default via LCD Menu===
-<ol>
-<li> On ITSV-1 idle screen, press MENU button and tap on System settings. Or go to onscreen MENU > Settings </li>
-<li> Select Advanced Settings > Factory Reset, the following figure will show </li>
-[[File:ITSV-1 factoryreset.png|400px|thumb|left|Factory Reset]]
-<br style="clear:both;" />
-<li> Press OK, a confirmation message will show. Select "Clear the SD Card" if you would like to delete all the picture, videos and other files from the SD card storage on the ITSV-1</li>
-[[File:ITSV-1 resetconfirm.png|400px|thumb|left|Confirm the reset]]
-<br style="clear:both;" />
-<li> Press OK to confirm </li>
-</ol>
-===Restore to Factory Default via the Web GUI===
-<ol>
-<li> Login to ITSV-1 Web GUI and go to Maintenance>Upgrade page </li>
-<li> At the bottom of the page, click on the Reset button for Factory reset. Select "Clear the SD Card" if you would like to delete all the picture, videos and other files from the SD card storage on the ITSV-1</li>
-[[File:ITSV-1 webfactoryreset.png|600px|thumb|left|Factory Reset]]
-<br style="clear:both;" />
-<li> A dialog box will pop up to confirm factory reset. The dialog box is created at the top of the screen</li>
-[[File:ITSV-1 webconfirmreset.png|600px|thumb|left|Confirm the reset]]
-<br style="clear:both;" />
-<li> Click OK to restore the ITSV-1 to factory settings </li>
-</ol>
-===Restore to Factory Default via Hard Keys===
+== Restore Factory Defaults and Software Upgrade ==
-If users could not access web GUI for factory reset, or when the ITSV-1 cannot boot up, follow the steps below to reset the ITSV-1 via hard keys.
+* [[ITSV-1 Restore Factory Defaults|Restore Factory Defaults]]
-# Turn off the ITSV-1
+* [[ITSV-1 - Software Upgrade|Upgrade via the ITSV-1 web interface]]
-# Press and hold both 1 and 9 keys at the same time until it enters the factory reset mode
-# The ITSV-1 will boot up with factory default settings
@@ Line 80: / Line 57: @@
 * [https://www.zenitel.com/product/itsv-1 Documentation on Zenitel.com]
-[[Category: Other IP based devices]]
+[[Category: Discontinued Stations]]