Difference between revisions of "IP Heavy Duty Station"
From Zenitel Wiki
(→Configuration) |
|||
| Line 12: | Line 12: | ||
General configuration: | General configuration: | ||
| − | * [[IP Station Configuration - ICX-AlphaCom mode]] | + | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] |
| − | * [[Adding station to existing system (Edge)| | + | * [[Adding station to existing system (Edge)|Edge mode]] |
| − | * [[SIP Intercom | + | * [[SIP Intercom - Web Interface|SIP mode]] |
| − | * [[IP Station Configuration - Pulse mode]] | + | * [[IP Station Configuration - Pulse mode|Pulse mode]] |
Station specific configuration for the IP Heavy Duty station: | Station specific configuration for the IP Heavy Duty station: | ||
Revision as of 13:40, 30 June 2022
|
This product is discontinued! |
This product is replaced by 1008472xxx IP Heavy Duty Station V2
Contents
Connections
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
General configuration:
Station specific configuration for the IP Heavy Duty station:
- Configuration of IP Heavy Duty station - AlphaCom mode
- Configuration of IP Heavy Duty station - Pulse mode
- Configuration of IP Heavy Duty station - SIP mode
Restore Factory Defaults and Software Upgrade
- Restore factory default settings
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
Connectors, Indicators and Dimensions
Software Requirements
This station is fully supported as form AlphaCom version 10.20