Difference between revisions of "School IP Intercom - 1402001000"

Latest revision as of 08:48, 16 August 2022

This product is discontinued!

Connections

Intercom connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Note that the off-line display menu is not available for the School IP Intercom, as the navigation buttons are not present on this station. The station must be configured via the web interface.

General configuration.

Station specific configuration for the School IP Intercom:

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Surface-Mount Backbox for School IP Intercom (1402001010)
Flush-Mount Backbox for School IP Intercom (1402001030)

Software Requirements

This station is fully supported as form AlphaCom version 10.50

Additional Information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-{{APS}}
+{{Obsolete}}
+{{AEIPS}}
 [[image:1402001000.PNG|right|250px|IP School Intercom]]
 == Connections ==
 * [[IP Flush Connections|Intercom connections]]
@@ Line 6: / Line 8: @@
 ==Configuration==
 The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure. <br>
-General configuration:
-* [[IP Station Configuration - AlphaCom mode]]
-* [[IP Station Configuration - SIP mode]]
-* [[IP Station Configuration - Pulse mode]]
+Note that the [[Display Setup Menu (IP Stations)|off-line display menu]] is ''not available'' for the School IP Intercom, as the navigation buttons are not present on this station. The station must be configured via the web interface.
-Station specific configuration:
+General configuration.
-* [[School Intercom special configuration]]
+* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
-* [[School Intercom Keyboard Settings|Keyboard Settings]]
+* [[Adding station to existing system (Edge)|Edge mode]]
+* [[SIP Intercom - Web Interface|SIP mode]]
+* [[IP Station Configuration - Pulse mode|Pulse mode]]
-== Advanced Network Settings ==
+Station specific configuration for the School IP Intercom:
-* [[IEEE 802.1Q|VLAN (IEEE 8021Q)]]
+* [[Configuration guide for School IP Intercom - AlphaCom mode|Configuration of School IP Intercom station - AlphaCom mode]]
-* [[IEEE 802.1X|Network Access Control (802.1X)]]
+* [[Configuration guide for School IP Intercom (Edge)|Configuration of School IP Intercom station  - Edge mode]]
+* [[Configuration guide for School IP Intercom (Pulse)|Configuration of School IP Intercom station  - Pulse mode]]
+* [[Configuration guide for School IP Intercom (SIP)|Configuration of School IP Intercom station - SIP mode]]
 == Restore Factory Defaults and Software Upgrade ==
 * [[IP School Intercom Station Restore Factory Defaults|Reset to factory settings]]
-* [[INCA Station Software upgrade|Software Upgrade]]
+* [[INCA Station Software upgrade|Upgrade via the station web interface]]
+* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
 * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
+* [[:Category:INCA Release notes|Software Release Notes]]
 == Connectors, Indicators and Dimensions ==
@@ Line 34: / Line 39: @@
 * Surface-Mount Backbox for School IP Intercom (1402001010)
 * Flush-Mount Backbox for School IP Intercom (1402001030)
+== Software Requirements ==
+This station is fully supported as form AlphaCom version 10.50
 ==Additional Information ==
 * [http://www.zenitel.com/product/school-ip-intercom Additional Documentation on Zenitel.com]
+[[Category: Discontinued Stations]]
-[[Category: INCA Stations]]