Actions

Difference between revisions of "IMT - Basic Intercom System Setup"

From Zenitel Wiki

(Station Discovery and Upgrade Wizard)
Line 325: Line 325:
  
 
== Station Discovery and Upgrade Wizard ==
 
== Station Discovery and Upgrade Wizard ==
Once the system has been planned it is time to start VS-IMT and run the [[IMT - Station Wizard|Wizard]].
+
Once the system has been planned it is time to start IMT and run the [[IMT - Station Wizard|Wizard]].
  
 
* [[IMT - Discover Stations]]
 
* [[IMT - Discover Stations]]
Line 333: Line 333:
 
* [[IMT - Review Results]]
 
* [[IMT - Review Results]]
  
[[Category:IMT]]
+
[[Category: IMT]]

Revision as of 12:26, 16 August 2022

AEIPS.png
IMT1.png

Overview

The procedure for deploying IP-intercom stations is

  1. Planning your system
  2. Discovery of intercom devices
  3. Identification of intercom devices and assigning a directory number
  4. Software upgrade
  5. Configuration
  6. Verifying configuration

A Wizard will guide you through the procedure.

Planning the installation

Plan your installation by collecting configuration data you would need to setup your system.

Planning an AlphaCom Installation

The table below is an example of data you would need for a typical AlphaCom IP intercom installation.

AlphaCom system parameters

Parameter Value
Station mode AlphaCom
AlphaCom site 1 10.4.2.2
IP gateway site 1 10.4.2.1
IP address range site 1 10.4.2.x
IP network mask site 1 255.255.255.0
AlphaCom site 2 10.7.2.2
IP gateway site 2 10.7.2.1
IP address range site 2 10.7.2.x
IP network mask site 2 255.255.255.0

AlphaCom system intercom information

Dir. No. Name Location (Site) IP configuration MAC-address * Host name Other
101 Hans B1, F1, R1 10.4.2.7 00:13:CB:01:5F:27 Zenitel-101  
102 Thomas B1, F1, R2 10.4.2.8 00:13:CB:06:01:4C Zenitel-102  
103 Front door B1, Main Entrance 10.4.2.9 00:13:CB:00:AA:38 Zenitel-103 Noisy environment
104 Back door B1, Back Door 10.4.2.10 00:13:CB:00:1B:CA Zenitel-104  
201 Emil B2, F3, R6 DHCP 00:13:CB:01:5F:28 DHCP  
202 Frano B2, F3, R8 DHCP 00:13:CB:06:01:45 DHCP  
203 Lab B2, Lab Entrance DHCP 00:13:CB:00:AA:39 DHCP  
204 Datacenter B2, Data Center DHCP 00:13:CB:00:1B:CE DHCP  

*Note that you don’t need to obtain all the MAC addresses upfront. The AlphaCom directory report from the Discovery Wizard Finish step has MAC addresses in the directory list.

Planning a Pulse Installation

The tables below are examples of data you would require for a typical Pulse system installation.

Pulse system parameters

Parameter Value
Station mode Pulse
Server site 192.16.8.29
IP gateway site 192.16.8.1
IP address range site 192.16.8.x
IP network mask site 255.255.255.0

Pulse system intercom information

Dir. No. Name Location (Site) IP configuration MAC-address Host name Other
101 Reception Reception 192.16.8.29 00:13:cb:00:32:d0 Flush Master IP Master Station
102 John Smith Head Office DHCP 00:13:cb:02:5d:94 Desk Master IP Desktop Station
103 Peter Brink Head Office DHCP 00:13:cb:02:5c:8e Desk Master IP Desktop Station
201 Entrance Main Entrance DHCP 00:13:cb:06:3a:3e TCIV-3 IP Substation
202 Elevator Main Hall DHCP 00:13:cb:08:00:fe TMIS-1 IP Substation
301 Office 1 1st floor DHCP 00:13:cb:06:of:9e TCIS-5 IP Substation
302 Office 2 2nd floor DHCP 00:13:cb:06:2a:54 TCIS-4 IP Substation
303 Office 3 3rd floor DHCP 00:13:cb:06:06:22 TCIS-6 IP Substation

Planning a SIP Installation

The tables below are examples of data you would require for a typical SIP IP intercom installation.

SIP system parameters

Parameter Value
Station mode SIP
Server site 192.16.8.100
IP gateway site 192.16.8.1
IP address range site 192.16.8.x
IP network mask site 255.255.255.0

SIP system intercom information

Dir. No. Name Location (Site) IP configuration MAC-address Host name Other
101 Reception Reception 192.16.8.29 00:13:cb:00:32:d0 Flush Master IP Master Station
102 John Smith Head Office 192.16.8.18 00:13:cb:02:5d:94 Desk Master IP Desktop Station
103 Peter Brink Head Office 192.16.8.19 00:13:cb:02:5c:8e Desk Master IP Desktop Station
201 Entrance Main Entrance 192.16.8.32 00:13:cb:06:3a:3e TCIV-3 IP Substation
202 Elevator Main Hall 192.16.8.34 00:13:cb:08:00:fe TMIS-1 IP Substation
301 Office 1 1st floor 192.16.8.35 00:13:cb:06:of:9e TCIS-5 IP Substation
302 Office 2 2nd floor 192.16.8.36 00:13:cb:06:2a:54 TCIS-4 IP Substation
303 Office 3 3rd floor 192.16.8.39 00:13:cb:06:06:22 TCIS-6 IP Substation

Station Discovery and Upgrade Wizard

Once the system has been planned it is time to start IMT and run the Wizard.