Difference between revisions of "Turbine Compact series board connectors"
From Zenitel Wiki
(→Rear side) |
|||
Line 38: | Line 38: | ||
== Rear side== | == Rear side== | ||
[[File:TurbineCompactRearPCB.png]] | [[File:TurbineCompactRearPCB.png]] | ||
− | |||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
+ | Using an output to control a relay: | ||
[[File:TurbineCompactOutputs.PNG|400px]] | [[File:TurbineCompactOutputs.PNG|400px]] | ||
Revision as of 13:22, 20 October 2023
Item | Description | Comment |
1¹ | Relay | Double Throw (SPDT) relay contact with 60W switching power. Max: 250VAC/220VDC, 2A, 60W |
2¹ | I/O interface | 6 general purpose I/Os. Each I/O can be configured either as an input or 12mA LED driver output |
3¹ | Line Output | Balanced 600 ohm audio line out. Suitable for external induction loop amplifier, PA amplifiers etc |
4¹ | Speaker Output | Connection for 8 ohm loudspeaker (50 ohm on TMIS-x) |
5¹ | Microphone Input | Electret mic input |
6¹ | Power Input | Optional 24VDC power input from external power supply (if PoE is not provided) |
7 | LAN Port | 10/100Mbps RJ-45 port for Ethernet connection. |
¹) Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm². |
|
Rear side
Using an output to control a relay:
Most general purpose P-Channel MOSFET's should work. Recommended example: BSS84
See also Adding additional relay(s) to a Zenitel IP Device
Front Board (A100C08129)
Front
Rear