Difference between revisions of "Turbine Compact series board connectors"
From Zenitel Wiki
(→Rear side) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 21: | Line 21: | ||
| 5¹ || Microphone Input || Electret mic input | | 5¹ || Microphone Input || Electret mic input | ||
|- | |- | ||
| − | | 6¹ || Power Input || Optional 24VDC power input from external power supply (if PoE is not provided) | + | | 6¹ || Power Input || Optional 24VDC/0.5A power input from external power supply (if PoE is not provided) |
|- | |- | ||
| 7 || LAN Port || 10/100Mbps RJ-45 port for Ethernet connection. | | 7 || LAN Port || 10/100Mbps RJ-45 port for Ethernet connection. | ||
| Line 41: | Line 41: | ||
Using an output to control a relay: | Using an output to control a relay: | ||
| + | |||
[[File:TurbineCompactOutputs.PNG|400px]] | [[File:TurbineCompactOutputs.PNG|400px]] | ||
Latest revision as of 14:34, 2 July 2024
| Item | Description | Comment |
| 1¹ | Relay | Double Throw (SPDT) relay contact with 60W switching power. Max: 250VAC/220VDC, 2A, 60W |
| 2¹ | I/O interface | 6 general purpose I/Os. Each I/O can be configured either as an input or 12mA LED driver output |
| 3¹ | Line Output | Balanced 600 ohm audio line out. Suitable for external induction loop amplifier, PA amplifiers etc |
| 4¹ | Speaker Output | Connection for 8 ohm loudspeaker (50 ohm on TMIS-x) |
| 5¹ | Microphone Input | Electret mic input |
| 6¹ | Power Input | Optional 24VDC/0.5A power input from external power supply (if PoE is not provided) |
| 7 | LAN Port | 10/100Mbps RJ-45 port for Ethernet connection. |
|
¹) Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm². |
|
|
|
Rear side
Using an output to control a relay:
Most general purpose P-Channel MOSFET's should work. Recommended example: BSS84
See also Adding additional relay(s) to a Zenitel IP Device
Front Board (A100C08129)
|
|
Not applicable to TKIS-2 and TMIS-x |
Front
Rear
