Difference between revisions of "IP Heavy Duty Station"

Latest revision as of 11:14, 5 August 2024

This product is discontinued!

The IP Heavy Duty Station comes in different variants regarding door and keyboard

These products are replaced by 1008472xxx IP Heavy Duty Station V2

Connections

Station connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

General configuration:

Station specific configuration for the IP Heavy Duty station:

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Software Requirements

This station is fully supported as form AlphaCom version 10.20

Related information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-{{APS}}
+{{AEIPS}}
+{{Obsolete}}
 [[File:IP HeavyDuty.png|thumb|350px|The IP Heavy Duty Station comes in different variants regarding door and keyboard]]
+These products are replaced by [[IP Heavy Duty Station V2|1008472xxx IP Heavy Duty Station V2]]
+== Connections ==
-===<u>Configuration</u>===
+* [[IP Heavy Duty Connections|Station connections]]
-== Getting Started ==
-* [[IP Heavy Duty Connections|InterCom connections]]
 ==Configuration==
 The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
-* [[IP Station Configuration - AlphaCom mode]]
-* [[IP Station Configuration - SIP mode]]
-* [[IP Station Configuration - Pulse mode]]
-== Advanced Network Settings ==
+General configuration:
-* [[IEEE 802.1Q|VLAN (IEEE 8021Q)]]
+* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
-* [[IEEE 802.1X|Network Access Control (802.1X)]]
+* [[Adding station to existing system (Edge)|Edge mode]]
+* [[SIP Intercom - Web Interface|SIP mode]]
+* [[IP Station Configuration - Pulse mode|Pulse mode]]
+Station specific configuration for the IP Heavy Duty station:
+* [[Configuration guide for IP Heavy Duty|Configuration of IP Heavy Duty station - AlphaCom mode]]
+* [[Configuration guide for IP Heavy Duty (Pulse)|Configuration of IP Heavy Duty station - Pulse mode]]
+* [[Configuration guide for IP Heavy Duty (SIP)|Configuration of IP Heavy Duty station - SIP mode]]
 == Restore Factory Defaults and Software Upgrade ==
 * [[IP Heavy Duty - Restore Factory Defaults|Restore factory default settings]]
-* [[INCA Station Software upgrade|Software Upgrade]]
+* [[INCA Station Software upgrade|Upgrade via the station web interface]]
+* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
 * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
@@ Line 28: / Line 32: @@
 *[[INCA Substation PCB LED Indicators|PCB LED Indications]]
 *[[IP Heavy Duty station Dimensions & Mounting Instructions|Dimensions]]
+== Software Requirements ==
+This station is fully supported as form AlphaCom version 10.20
 == Related information ==
@@ Line 33: / Line 40: @@
 [[Category: INCA Stations]]
+[[Category: Discontinued Stations]]