Difference between revisions of "SoftClient - Release Notes"
From Zenitel Wiki
(→Errors Corrected) |
|||
| (13 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
'''Release State:''' Released<br/> | '''Release State:''' Released<br/> | ||
| − | '''Release Version:''' 1. | + | '''Release Version:''' 1.2.3.1<br/> |
| − | '''Last Release Date:''' | + | '''Last Release Date:''' 2013-11-08 |
| + | |||
| + | = Release 1.2.3.1 = | ||
| + | |||
| + | == Errors Corrected == | ||
| + | |||
| + | === No separate volume adjustment for ringing tone (MTN-97) === | ||
| + | |||
| + | Customers using softclients as masterstation is complaining about the fact that the volume of the ringing tone is too loud compared to the audio from the intercomstations. | ||
| + | |||
| + | Added Volume control slider for local generated tones under 'Preferences' / 'Configure Audio Device' | ||
| + | Default tone amplitude gain is set to -16 dBm0. | ||
| + | Note! The control only applies for local generated tones as Call Request tones. | ||
| + | Ringing tones etc is sent from AlphaCom as rtp audio, and do not have a separate tone control, but adjusted as normal audio playback for application. | ||
| + | |||
| + | = Release 1.2.3.0 = | ||
| + | |||
| + | == Errors Corrected == | ||
| + | |||
| + | === {{Bugzilla|450}} SoftClient missing audio (Multicast and local tones) === | ||
| + | |||
| + | Group call audio and alarm messages not working. Applies to both multiplied | ||
| + | unicast and multicast. Fixed. | ||
| + | |||
| + | Note! True multicast support still missing, but the SoftClient should be able to operate in an multicast setup. | ||
| + | |||
| + | = Release 1.1.3.0 = | ||
| + | |||
| + | == Enhancements == | ||
| + | |||
| + | Add configuration of SoftClient Process Priorities "System Standard" or "High" (default). | ||
| + | Setting a higher pri on process might help in systems with high loads, and poor audio quality in the SoftClient. | ||
= Release 1.0.3.2 = | = Release 1.0.3.2 = | ||
| Line 21: | Line 52: | ||
=== {{Bugzilla|438}} '''Partly fixed''' - SoftClient mising audio (Multicast and local tones) === | === {{Bugzilla|438}} '''Partly fixed''' - SoftClient mising audio (Multicast and local tones) === | ||
| − | The softclient do | + | The softclient do now play local tones (Call request tone etc) as commanded from the AlphaCom |
=== {{Bugzilla|495}} Not possible to use dirno starting with zero === | === {{Bugzilla|495}} Not possible to use dirno starting with zero === | ||
| Line 29: | Line 60: | ||
=== When flushing and importing new contacts the Address book view contains a empty lines === | === When flushing and importing new contacts the Address book view contains a empty lines === | ||
| − | The view | + | The Addressbook view is now refreshed correctly. No SoftClient reset required. |
= Release 1.0.3.1 = | = Release 1.0.3.1 = | ||
Latest revision as of 09:29, 22 August 2024
Release State: Released
Release Version: 1.2.3.1
Last Release Date: 2013-11-08
Contents
- 1 Release 1.2.3.1
- 2 Release 1.2.3.0
- 3 Release 1.1.3.0
- 4 Release 1.0.3.2
- 4.1 Errors Corrected
- 4.1.1 BZ 412 Softclient size and placement
- 4.1.2 BZ 438 Incoming call gets cancelled when typing a document
- 4.1.3 BZ 438 Partly fixed - SoftClient mising audio (Multicast and local tones)
- 4.1.4 BZ 495 Not possible to use dirno starting with zero
- 4.1.5 When flushing and importing new contacts the Address book view contains a empty lines
- 4.1 Errors Corrected
- 5 Release 1.0.3.1
- 6 Release 1.0.3.0
Release 1.2.3.1
Errors Corrected
No separate volume adjustment for ringing tone (MTN-97)
Customers using softclients as masterstation is complaining about the fact that the volume of the ringing tone is too loud compared to the audio from the intercomstations.
Added Volume control slider for local generated tones under 'Preferences' / 'Configure Audio Device' Default tone amplitude gain is set to -16 dBm0. Note! The control only applies for local generated tones as Call Request tones. Ringing tones etc is sent from AlphaCom as rtp audio, and do not have a separate tone control, but adjusted as normal audio playback for application.
Release 1.2.3.0
Errors Corrected
BZ 450 SoftClient missing audio (Multicast and local tones)
Group call audio and alarm messages not working. Applies to both multiplied unicast and multicast. Fixed.
Note! True multicast support still missing, but the SoftClient should be able to operate in an multicast setup.
Release 1.1.3.0
Enhancements
Add configuration of SoftClient Process Priorities "System Standard" or "High" (default). Setting a higher pri on process might help in systems with high loads, and poor audio quality in the SoftClient.
Release 1.0.3.2
Errors Corrected
BZ 412 Softclient size and placement
The SoftClient do save its size and position on Application close (using Exit from menu or systray). It will not be saved on system shutdown. When SoftClient last placement is outside the visual desktop (i.e on a second monitor not currently present) it will be moved to upper left corner on monitor number 1.
BZ 438 Incoming call gets cancelled when typing a document
New config parameter "Inhibit key input after pop-up". If set the SoftClient will not accept any keyboard input after pop-up before the SoftClient window clicked with the left mouse button.
BZ 438 Partly fixed - SoftClient mising audio (Multicast and local tones)
The softclient do now play local tones (Call request tone etc) as commanded from the AlphaCom
BZ 495 Not possible to use dirno starting with zero
Registration Dirno validation on preferences dialogue updated to allow Dirno starting with zeros.
When flushing and importing new contacts the Address book view contains a empty lines
The Addressbook view is now refreshed correctly. No SoftClient reset required.
Release 1.0.3.1
Errors Corrected
BZ 431 Registration problem
Improved TCP connection monitoring after model from IP Station using low level socket TCP_KEEPALIVE.
Release 1.0.3.0
First official release.