Difference between revisions of "MB-30G"
From Zenitel Wiki
(→Additional Documentation) |
(→Configuration) |
||
| (10 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
[[File:3005020033.PNG|thumb|500px]] | [[File:3005020033.PNG|thumb|500px]] | ||
| − | + | ==Highlights== | |
* Electret Microphone, 2K ohm | * Electret Microphone, 2K ohm | ||
* 5-pin DIN plug | * 5-pin DIN plug | ||
| Line 7: | Line 7: | ||
* Length: 446 mm | * Length: 446 mm | ||
| − | + | ==Installation== | |
| − | Insert the 5-pin DIN plug on the gooseneck microphone in the microphone connector socket on the ECPIR | + | Insert the 5-pin DIN plug on the gooseneck microphone in the microphone connector socket on the ECPIR panel. |
| − | + | ==Configuration== | |
| − | Make sure "'''No accessory'''" | + | The default configuration of the ECPIR panel supports the gooseneck microphone, no additional configuration is required. |
| − | [[Image: | + | |
| + | Configuration can be verified in the web interface of the ECPIR panel: | ||
| + | * [[Logging into an Zenitel IP Device|Log in to the station web interface]] | ||
| + | * Enable '''Advanced Configuration''' | ||
| + | * Navigate to '''Audio Settings'''. Make sure "'''No accessory'''" is selected. | ||
| + | * In the section '''Audio Inputs''' the Internal Microphone should be "Gooseneck Mic". | ||
| + | [[Image:ECPIR Gooseneck.PNG|thumb|left|700px|ECPIR Gooseneck Microphone setting]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | + | ==Dimensions== | |
| − | [[File:MB-30G Dimensions.PNG|thumb|left| | + | [[File:MB-30G Dimensions.PNG|thumb|left|700px]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | === | + | ==Related information== |
| + | * [http://www.zenitel.com/product/mb-30g Additional Documentation on Zenitel.com] | ||
| + | |||
[[Category: Turbine Backboxes and accessories]] | [[Category: Turbine Backboxes and accessories]] | ||
Latest revision as of 15:30, 4 September 2024
Highlights
- Electret Microphone, 2K ohm
- 5-pin DIN plug
- For use in Public Address and Talk-Back Systems
- Length: 446 mm
Installation
Insert the 5-pin DIN plug on the gooseneck microphone in the microphone connector socket on the ECPIR panel.
Configuration
The default configuration of the ECPIR panel supports the gooseneck microphone, no additional configuration is required.
Configuration can be verified in the web interface of the ECPIR panel:
- Log in to the station web interface
- Enable Advanced Configuration
- Navigate to Audio Settings. Make sure "No accessory" is selected.
- In the section Audio Inputs the Internal Microphone should be "Gooseneck Mic".
Dimensions
