Actions

Difference between revisions of "MB-30G"

From Zenitel Wiki

(Configuration)
(Configuration)
 
(2 intermediate revisions by the same user not shown)
Line 11: Line 11:
  
 
==Configuration==
 
==Configuration==
 +
The default configuration of the ECPIR panel supports the gooseneck microphone, no additional configuration is required.
  
 +
Configuration can be verified in the web interface of the ECPIR panel:
 
* [[Logging into an Zenitel IP Device|Log in to the station web interface]]
 
* [[Logging into an Zenitel IP Device|Log in to the station web interface]]
 
* Enable '''Advanced Configuration'''
 
* Enable '''Advanced Configuration'''
Line 17: Line 19:
 
* In the section '''Audio Inputs''' the Internal Microphone should be "Gooseneck Mic".
 
* In the section '''Audio Inputs''' the Internal Microphone should be "Gooseneck Mic".
 
[[Image:ECPIR Gooseneck.PNG|thumb|left|700px|ECPIR Gooseneck Microphone setting]]
 
[[Image:ECPIR Gooseneck.PNG|thumb|left|700px|ECPIR Gooseneck Microphone setting]]
<br style="clear:both;" />
 
 
 
 
 
Make sure "'''No accessory'''" under Accessory in the ECPIR web interface.
 
[[Image:ecpir3p_gooseneck_web.png|thumb|left|500px|ECPIR Gooseneck accessory setting]]
 
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
 
==Dimensions==
 
==Dimensions==
[[File:MB-30G Dimensions.PNG|thumb|left|500px]]
+
[[File:MB-30G Dimensions.PNG|thumb|left|700px]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  

Latest revision as of 15:30, 4 September 2024

3005020033.PNG

Highlights

  • Electret Microphone, 2K ohm
  • 5-pin DIN plug
  • For use in Public Address and Talk-Back Systems
  • Length: 446 mm

Installation

Insert the 5-pin DIN plug on the gooseneck microphone in the microphone connector socket on the ECPIR panel.

Configuration

The default configuration of the ECPIR panel supports the gooseneck microphone, no additional configuration is required.

Configuration can be verified in the web interface of the ECPIR panel:

  • Log in to the station web interface
  • Enable Advanced Configuration
  • Navigate to Audio Settings. Make sure "No accessory" is selected.
  • In the section Audio Inputs the Internal Microphone should be "Gooseneck Mic".
ECPIR Gooseneck Microphone setting


Dimensions

MB-30G Dimensions.PNG


Related information