Difference between revisions of "MPC Data Protocol"
From Zenitel Wiki
(→Availability) |
|||
| Line 8: | Line 8: | ||
= Appendix: TouchLine Protocol in AlphaCom = | = Appendix: TouchLine Protocol in AlphaCom = | ||
== Availability == | == Availability == | ||
| + | |||
| + | AlphaCom has supported a serial data port which outputs TouchLine formatted output messages since AMC 03.00. | ||
| + | From software AMC 07.60, a limited subset of TouchLine input commands are supported also. | ||
| + | |||
=== Disclaimer === | === Disclaimer === | ||
| − | === Tips for use === | + | === Tips for use === |
| + | |||
== The TouchLine Protocol == | == The TouchLine Protocol == | ||
=== General === | === General === | ||
Revision as of 20:52, 19 June 2007
MPC Data Protocol in AlphaCom
The AlphaCom supports a subset of the MPC data protocol used with the classic Stentofon TouchLine exchanges. As it allows control of the AlphaCom exchange by mapping MPC commands to AlphaCom commands one-to-one it can be thought of as a variant of the simple link layer, but only for single-exchange (not AlphaNet) applications.
The output is broadcast of exchange events like dialled digits, station busy/free, connection and transfers. Note that it’s possible to send additional data strings from the AlphaCom’s Event Handler on this port also.
The AlphaCom supports a subset of the MPC Data Protocol for backward compatibility. This allowed some TouchLine generation equipment like PNCI, MLH and CRM to be used with the AlphaCom.
Appendix: TouchLine Protocol in AlphaCom
Availability
AlphaCom has supported a serial data port which outputs TouchLine formatted output messages since AMC 03.00. From software AMC 07.60, a limited subset of TouchLine input commands are supported also.