Actions

Difference between revisions of "AUDIO PATH OK"

From Zenitel Wiki

Line 13: Line 13:
 
Bit 1,0: protocol version:  <br>
 
Bit 1,0: protocol version:  <br>
 
*00 = Understands only original version of [[AUDIO_PATH_SETUP]]
 
*00 = Understands only original version of [[AUDIO_PATH_SETUP]]
*01 = Handled B­ station parameter added to  [[AUDIO_PATH_SETUP]] payload. [[AUDIO_PATH_SETUP]] remote functions 3 and 5 supported. Introduced in AMC 07.10.<br\>
+
*01 = Handled B­ station parameter added to  [[AUDIO_PATH_SETUP]] payload (param 14). [[AUDIO_PATH_SETUP]] remote functions 3 and 5 supported. Introduced in AMC 07.10.<br\>
*10 = Handled call setup flags + [[CALL_SETUP]] originator in [[AUDIO_PATH_SETUP]] payload. This is the current version of AlphaCom.
+
*10 = Handled call setup flags + [[CALL_SETUP]] originator in [[AUDIO_PATH_SETUP]] payload (params 15-18). This is the current version of AlphaCom.
 
*11 = unused
 
*11 = unused
 
Bit 2: Duplex<br\>
 
Bit 2: Duplex<br\>

Revision as of 11:11, 2 February 2009

AUDIO_PATH_OK 0x8002 32770 AMC 06.00
AlphaNet: End to end message: Audio path is ready. Payload is delivered.
1 NET_OBJ_REF<br\>{ECL_STATION} Proxy B station
2 UINT1 B­-function support: Indicates the capabilities the B-exchange has when acting as a B­-exchange in a conversation. Bitmask, bits counted from zero:<br\>

Bit 1,0: protocol version:

  • 00 = Understands only original version of AUDIO_PATH_SETUP
  • 01 = Handled B­ station parameter added to AUDIO_PATH_SETUP payload (param 14). AUDIO_PATH_SETUP remote functions 3 and 5 supported. Introduced in AMC 07.10.<br\>
  • 10 = Handled call setup flags + CALL_SETUP originator in AUDIO_PATH_SETUP payload (params 15-18). This is the current version of AlphaCom.
  • 11 = unused

Bit 2: Duplex<br\>

  • 0 = Basic<br\>
  • 1 = Run duplex algorithm in A exchange<br\>

Bit 3:Display text<br\>

  • 0 = Basic<br\>
  • 1 = Generate display text in A exchange for own A number<br\>

Bit 4: Telephone dialing:


Back to AlphaNet message list