Output call request to MLH/CRM feature: Difference between revisions

Revision as of 21:03, 8 January 2008

Feature:	Call Request to CRM
Default directory number:	621
Feature number:	49
Parameter 1:	0 (N/A)
Description:	A TouchLine style Call Request, where the Control Room station based on the MPC Data Protocol looks for connection to dummy numbers which are interpreted as queue numbers. Procedure: Dial 621, then the station cancels, and enters Call Requester Mode (ASVP voice message, then blinking LED). Call Requester mode is exited when the Call Request is answered, or the station is used for something. Data generated on the MPC Data Protocol: 0507 AAAA F621 0000 0000

@@ Line 1: / Line 1: @@
-'''49 FEAT_EXT_CALL_REQ FEATURE'''
-{| border="1"
-!style="background:#ffdead;"|Param1
-!style="background:#ffdead;"|Description
-|-
-| ?? || Output "Call request" message to external device
-|-
-|colspan="2"|Control Room:  Call request from station to dir.no.
-Calling station gets voice message, then ringing and blink.
-Data message sent on MPC port.
-|-
-|}
 {|
 |-
@@ Line 29: / Line 14: @@
 Procedure:  Dial 621, then the station cancels, and enters Call Requester Mode ([[ASVP]] voice message, then blinking LED).
 Call Requester mode is exited when the Call Request is answered, or the station is used for something.
 Data generated on the [[MPC Data Protocol]]:
 *0507 AAAA F621 0000 0000
-Some Control Room stations based on the [[MPC Data Protocol]] can do a reset on the built-in microprocessor.  This feature activates reset on all CRM stations.
-Procedure: Dial 7878
-Data generated on the [[MPC Data Protocol]]:
-*0213 FFFF
 |}
 [[AlphaCom Feature List|Back to feature list]]