Difference between revisions of "Simplex Conferences (AlphaPro)"
From Zenitel Wiki
| Line 1: | Line 1: | ||
{{A}} | {{A}} | ||
| − | [[File:AP SimplexConf.png|thumb|500px|thumb|The Simplex Conference window]] | + | [[File:AP SimplexConf.png|thumb|500px|thumb|The Simplex Conference window|none]] |
* '''Conference Number''': Reflects the choice highlighted in the listbox to the left | * '''Conference Number''': Reflects the choice highlighted in the listbox to the left | ||
Revision as of 14:45, 22 December 2017
- Conference Number: Reflects the choice highlighted in the listbox to the left
- Description: Here you enter the conference name, 32 characters available. The name is used in the listbox to the left. The information is not transferred to the exchange, but stored in the PC file
- Default Member: The selected station is always connected as a member of the conference. This can be used to include mobile radio systems or external conference bridges/systems in a conference
- Default Member is Default Speaker
- ON: The conference listens to the default member when no M-keys are pressed
- OFF: No audio when no M-keys are pressed
- Minimum Talk Priority: Four levels are available:
- Low (default)
- Medium
- High
- Alarm
Each station has a Talk Priority which must be higher than this setting (else the station can only listen to the conference).
- Conference over Conversation/AlphaNet Setup Priority:
- ON: Alarm priority: The conference seizes any necessary resources during setup in an AlphaNet installation. The conference remains on during ordinary conversations
- OFF: Description Missing
- AlphaNet Global Conference
- ON: The conference is a global conference. All exchanges to be involved in the same global conference and any transit nodes must have the same setting for the conference
- OFF: Local conference in this exchange (even if nodes in same AlphaNet uses it as a global conference)