Group Call - Increased volume: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{A}} | {{A}} | ||
This article describes how to '''increase the volume of a group call''' announcement. The volume is set back to default value when the group call is ended. | This article describes how to '''increase the volume of a group call''' announcement. The volume is set back to default value when the group call is ended. | ||
== Prerequisites == | == Prerequisites == | ||
* This event is CPU extensive. Maximum members in a group using this feature '''should not exceed approx. 50 stations'''. | * This event is CPU extensive. Maximum members in a group using this feature '''should not exceed approx. 50 stations'''. | ||
* Minimum software: AMC version 11. | * Minimum software: AMC version 11. | ||
== Configuration == | == Configuration == | ||
| Line 60: | Line 58: | ||
U6 and U3 can be changed to other values if required. | U6 and U3 can be changed to other values if required. | ||
Note that a standard feature exists, which might be a better alternative: | Note that a standard feature exists, which might be a better alternative: | ||
Group calls with "[[Groups#Group_Call_Setup_Priority|Setup Priority = Alarm]]" will automatically use the [[Volume and handset override|Volume Override feature]] of the AlphaCom, without any additional configuration required. | Group calls with "[[Groups#Group_Call_Setup_Priority|Setup Priority = Alarm]]" will automatically use the [[Volume and handset override|Volume Override feature]] of the AlphaCom, without any additional configuration required. | ||
[[Category:Applications]] | [[Category:Applications]] | ||
Revision as of 08:35, 11 January 2017
This article describes how to increase the volume of a group call announcement. The volume is set back to default value when the group call is ended.
Prerequisites
- This event is CPU extensive. Maximum members in a group using this feature should not exceed approx. 50 stations.
- Minimum software: AMC version 11.
Configuration
In the following example the volume will be set to level 6 when group call 86 is called from stations in UDP group 2. The volume is set to level 3 (default) when the group call is ended.
When stations outside UDP group 2 dial group call 86 this event will not be triggered, and the volume will not be altered.
In AlphaPro, go to Exchange and System -> Events, press Insert and create the following event (the action strings can be copy/paste from here into AlphaPro):
| Event Owner: | Stations with UDP: Id: 2 |
| Event type: | 08 - Conversation Outgoing |
| Sub event: | 0 |
| When change to: | ON or OFF |
| When related to: | Directory Number, Id: 86 |
| Action: |
IF %chg(1,0) tmp 0 "%gns(%2.phy,0)" LOOP IF %op(%tmp(0),=,0) STOP ENDIF $VOL N%tmp(0) U6 tmp 0 "%gns(%2.phy, %tmp(0))" ENDLOOP stop ENDIF tmp 0 "%gns(%2.phy,0)" LOOP IF %op(%tmp(0),=,0) STOP ENDIF $VOL N%tmp(0) U3 tmp 0 "%gns(%2.phy, %tmp(0))" ENDLOOP
In the action strings above, there are two lines that defines the volume. Volume during group call is set to 6 (U6) by the command:
$VOL N%tmp(0) U6
Volume is set to 3 (U3) when the group call is ended by the command:
$VOL N%tmp(0) U3
U6 and U3 can be changed to other values if required.
Note that a standard feature exists, which might be a better alternative: Group calls with "Setup Priority = Alarm" will automatically use the Volume Override feature of the AlphaCom, without any additional configuration required.