Difference between revisions of "TA-10"

Latest revision as of 13:41, 27 June 2023

TA-10 is a Relay Module to be used with Turbine Industrial stations TFIE-1 and TFIE-2, and the Turbine kits TKIE-1 and TKIE-2.

The TA-10 Relay Module

Highlights

Designed for use with Turbine Industrial stations TFIE-x, and the Turbine kits TKIE-x
Fits inside the TFIE Industrial stations (Bracket is included in the TFIE station)
Dual high-power relays (DPDT)
Up to 400VAC /48 VDC per relay
Up to 8A current per relay
Heavy-duty spring-loaded terminals with spare grounding terminals
Powered by Turbine Industrial stations (TFIE-x) or Turbine Extended Kit (TKIE-x)

Connection

Use the cable that comes with the TA-10, and connect one end to the Turbine Extended Board (Connector J2), and the other end to the TA-10 board as indicated in the drawing below

Connecting the TA-10 Relay Unit to a TFIE station or a TKIE kit

Configuration

Logical RCO 11 is mapped to the relay of the TA-10 unit on station 118

ICX-AlphaCom Mode:

Use the AlphaPro tool, and go to Exchange & System > RCO
The two relays must be mapped in the RCO table as pin 9 and pin 10
See RCO - Remote Control Output for more details

SIP or Pulse mode:

Log on to the web interface of the station
Select SIP Configuration > Relay Settings, select Relay 3 or Relay 4, and configure which event should operate the relay
See Relay Settings for more details

Dimensions

Dimensions (WxHxD): 100 x 50 x 40 mm
Weight: 0.1 kg

Related Information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-__NOTOC__
+{{AEIPS}}
-[[File:1008140100.PNG|thumb|350px]]
+'''TA-10''' is a Relay Module to be used with Turbine Industrial stations [[TFIE-1]] and [[TFIE-2]], and the Turbine kits [[TKIE-1]] and [[TKIE-2]].
+[[File:1008140100.PNG|thumb|350px|The TA-10 Relay Module]]
-===Highlights===
+==Highlights==
-* Designed for use with Turbine Industrial IP Intercom stations
+* Designed for use with Turbine Industrial stations TFIE-x, and the Turbine kits TKIE-x
+* Fits inside the TFIE Industrial stations (Bracket is included in the TFIE station)
 * Dual high-power relays (DPDT)
 * Up to 400VAC /48 VDC per relay
-* Up to 6A current per relay
+* Up to 8A current per relay
 * Heavy-duty spring-loaded terminals with spare grounding terminals
 * Powered by Turbine Industrial stations (TFIE-x) or Turbine Extended Kit (TKIE-x)
-===Dimensions===
+==Connection==
+* Use the cable that comes with the TA-10, and connect one end to the Turbine Extended Board (Connector J2), and the other end to the TA-10 board as indicated in the drawing below
+[[File:TA10-TFIE Connection.PNG|thumb|left|400px|Connecting the TA-10 Relay Unit to a TFIE station or a TKIE kit]]
+<br style="clear:both;" />
+==Configuration==
+[[File:TA-10 RCO map.PNG|right|400px|thumb|Logical RCO 11 is mapped to the relay of the TA-10 unit on station 118]]
+'''ICX-AlphaCom Mode''':
+* Use the [[AlphaPro]] tool, and go to '''Exchange & System''' > '''RCO'''
+* The two relays must be mapped in the RCO table as pin 9 and pin 10
+* See [[RCO - Remote Control Output]] for more details
-{|border="1"
+'''SIP or Pulse mode''':
-|width="250px"|&nbsp;
+* Log on to the web interface of the station
-|width="250px"|'''Dimensions (WxHxD)'''
+* Select '''SIP Configuration''' > '''Relay Settings''', select '''Relay 3''' or '''Relay 4''', and configure which event should operate the relay
-|width="150px"|'''Weight'''
+* See [[Relay_Settings_(SIP)|Relay Settings]] for more details
-|-
-|TA-10 || 100 x 50 x 40 mm || 0.1 kg
-|}
-===Connections===
+==Dimensions==
-[[File:TA-10.png|thumb|left|500px|Relay 3 is configured as output 9, and Relay 4 is configured as output 10]]
+*'''Dimensions (WxHxD)''': 100 x 50 x 40 mm
-<br style="clear:both;" />
+*'''Weight''': 0.1 kg
-===<u>[http://www.zenitel.com/product/ta-10 Additional Documentation on Zenitel.com]</u>===
+== Related Information ==
+* [http://www.zenitel.com/product/ta-10 Additional Documentation on Zenitel.com]
 [[Category: Turbine Backboxes and accessories]]