Actions

Difference between revisions of "Dual Display Configuration"

From Zenitel Wiki

(Navigation keys (1))
(IP Dual Display Station)
 
(28 intermediate revisions by 3 users not shown)
Line 1: Line 1:
===<u>Application</u>===
+
{{A}}
 +
==Application==
 
The Dual Display station is primary intended to be used as a table top station in bank / finance environment and offices where quick access to several preprogrammed extension numbers and functions is essential.
 
The Dual Display station is primary intended to be used as a table top station in bank / finance environment and offices where quick access to several preprogrammed extension numbers and functions is essential.
  
Line 7: Line 8:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
===<u>The principal</u>===
+
==The principal==
 +
DAK-labelling is stored in the station memory
 +
:* Labels are sent from the exchange as display data
  
* DAK-labelling is stored in the station memory
+
The station recognises 10 DAK-pages
:* Labels are sent from the exchange as display data
+
 
* The station recognises 10 DAK-pages
+
DAK-page 3 reserved for the 4 function keys
* DAK-page 3 reserved for the 4 function keys
 
 
:* DAK-buttons 21-24, buttons 25-30 are unused
 
:* DAK-buttons 21-24, buttons 25-30 are unused
* The dialling code sent on the abcd-wires depends on the selected DAK-page
 
  
===<u>DAK-keys in the AMC</u>===
+
The dialling code sent on the abcd-wires (for analogue stations) depends on the selected DAK-page
  
* Each station has a DAK-table with 24 lines (from AMC 9)
+
==DAK-keys in the AMC==
 +
Each station has a DAK-table with 24 lines (from AMC9)
 
:* 20 lines are for general use (1-20)
 
:* 20 lines are for general use (1-20)
 
:* 4 lines are reserved for navigation keys
 
:* 4 lines are reserved for navigation keys
* More DAK keys can be reached via re-direction
+
More DAK keys can be reached via re-direction
 
 
===<u>DAK-redirection</u>===
 
  
* DAK 1-10 is used for redirection of DAK keys from other stations
+
==DAK-redirection==
* DAK 11-20 is not used for redirection
+
Only DAK 1-10 can be used for redirection of DAK keys to other stations. DAK 11-20 cannot be used for redirection.
 
[[Image:DD DAK redir.PNG|left|200px|thumb]]
 
[[Image:DD DAK redir.PNG|left|200px|thumb]]
 
DAK page 1 is DAK 1-10 on station 501<br />
 
DAK page 1 is DAK 1-10 on station 501<br />
Line 40: Line 40:
  
  
* NOTE: 9544 (101/2) must be changed to 101/10 to have 9 DAK pages! See also below.
+
'''NOTE:''' 9544 (101/2) must be changed to 101/10 to have 9 DAK pages! See also below.
  
<br /><br />
+
<br style="clear:both;" />
  
===<u>Station definition in AlphaPro</u>===
+
==Station definition in AlphaPro==
 
[[Image:DualDisplayConfig1.png|left|500px|thumb]]
 
[[Image:DualDisplayConfig1.png|left|500px|thumb]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
Line 98: Line 98:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
===<u>Default directory numbers</u>===
+
==Default directory numbers==
*Dual Display Station default directory numbers, display texts and features  
+
Dual Display Station default directory numbers, display texts and features  
:*9542: DualDsplMnu (21/12)
+
:*9542: [[Enter menu feature|DualDsplMnu (21/12)]]
:*9537: AlphaNumSrch (21/13)
+
:*9537: [[Enter menu feature|AlphaNumSrch (21/13)]]
:*9541: ProgramDAK (32/128)
+
:*9541: [[Program Direct Access Key feature|ProgramDAK (32/128)]]
:*9540: EditDAKText (100/0)
+
:*9540: [[Edit DAK text|EditDAKText (100/0)]]
:*9543: DispDAKpgD (101/1)
+
:*9543: [[Select DAK page|DispDAKpgD (101/1)]]
:*9544: DispDAKpgU2 (101/2)
+
:*9544: [[Select DAK page|DispDAKpgU2 (101/2)]]
  
===<u>DAK Labels (1)</u>===
+
==DAK Labels==
*3 text types for DAK Display
+
3 text types for DAK Display
 
:*User defined text programmed in the DAK string
 
:*User defined text programmed in the DAK string
::*Text programmed from AlphaPro or from the station
+
::-Text programmed from AlphaPro or from the station
 
:*Display the 8 first letters of the display text related to the directory number assigned to the DAK key
 
:*Display the 8 first letters of the display text related to the directory number assigned to the DAK key
 
:*Display the directory number assigned to the DAK key
 
:*Display the directory number assigned to the DAK key
Line 117: Line 117:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
===<u>DAK programming – AlphaPro</u>===
+
==DAK programming – AlphaPro==
*T-command in DAK-string: I 102 TDoor A4  
+
T-command in DAK-string: I 102 TDoor A4  
 
:*DAK label = “Door A4”
 
:*DAK label = “Door A4”
 
:*Max DAK-string length: 19 char.
 
:*Max DAK-string length: 19 char.
 
:*Max label length: 8 characters
 
:*Max label length: 8 characters
 
:*Must be the last command in the string
 
:*Must be the last command in the string
[[Image:DD DAK2.PNG|left|500px|thumb]]
+
[[Image:DualDisplayConfig3.png|left|400px]]
 +
[[Image:DualDisplayConfig6.png|left|400px]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
*DAK-string without T-command: I 102
+
----
 +
 
 +
DAK-string without T-command: I 102
 
:*DAK label = the first 8 characters of the display text of 102
 
:*DAK label = the first 8 characters of the display text of 102
 
:*Only available when programmed as directory number from Idle (“I”)
 
:*Only available when programmed as directory number from Idle (“I”)
[[Image:DD DAK3.PNG|left|500px|thumb]]
+
[[Image:DualDisplayConfig2.png|left|400px]]
 +
[[Image:DualDisplayConfig5.png|left|400px]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
*Station flag ‘DAK display show directory number’ is set:  
+
----
 +
 
 +
Station flag ‘DAK display show directory number’ is set:  
 
:*DAK label = directory number instead of display text
 
:*DAK label = directory number instead of display text
 
:*Only available when programmed as directory number from Idle (“I”)
 
:*Only available when programmed as directory number from Idle (“I”)
[[Image:DD DAK4.PNG|left|500px|thumb]]
+
[[Image:DualDisplayConfig4.png|left|400px]]
 +
[[Image:DualDisplayConfig7.png|left|400px]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
===<u>DAK programming – Station (1)</u>===
+
==DAK programming – Station(1)==
*Assign directory number to DAK-key
+
Assign directory number to DAK-key
 
:*Press ‘Name’, + arrow-down to select ‘ProgramKey’, followed by OK
 
:*Press ‘Name’, + arrow-down to select ‘ProgramKey’, followed by OK
 
:*Enter the directory number  
 
:*Enter the directory number  
Line 146: Line 153:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
*Delete the DAK-key programming
+
Delete the DAK-key programming
 
:*Press ‘Name’, + arrow-down to select ‘ProgramKey’, followed by OK
 
:*Press ‘Name’, + arrow-down to select ‘ProgramKey’, followed by OK
 
:*Press the DAK-key to be deleted
 
:*Press the DAK-key to be deleted
 
:*Confirm by pressing ‘Del’  
 
:*Confirm by pressing ‘Del’  
*The 784 + number + DAK is also possible to use
+
The 784 + number + DAK is also possible to use
 
[[Image:Bilde12.jpg|left|500px|thumb]]
 
[[Image:Bilde12.jpg|left|500px|thumb]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
===<u>DAK programming – Station (2)</u>===
+
==DAK programming – Station(2)==
* Program a DAK label from the station
+
Program a DAK label from the station
 
:*Press ‘Name’, + arrow-up to select ‘EditDAKText’, followed by OK
 
:*Press ‘Name’, + arrow-up to select ‘EditDAKText’, followed by OK
 
:*Press the DAK-key
 
:*Press the DAK-key
Line 167: Line 174:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
===<u>DAK page limits</u>===
+
==DAK page limits==
 
 
 
*The station is designed for 10 DAK-pages
 
*The station is designed for 10 DAK-pages
 
*DAK-page 3 is fixed for navigation key use
 
*DAK-page 3 is fixed for navigation key use
*DAK keys 1-30 (the first 2 pages and the navigation keys) can also be used during conversation
+
*DAK keys 1-24 (the first 2 pages and the navigation keys) can also be used during conversation
 
*DAK keys 31-50 are OK from idle. Features during conversation (e.g. door opening) sometimes fails
 
*DAK keys 31-50 are OK from idle. Features during conversation (e.g. door opening) sometimes fails
 
*DAK keys 51-100 are OK from idle. Features during conversation (e.g. door opening) always fails
 
*DAK keys 51-100 are OK from idle. Features during conversation (e.g. door opening) always fails
*IMPORTANT: Due to the above, the station is marketed as a station with 2 DAK-pages + navigation keys
 
  
===<u>DualDisplay station used for Call Queuing</u>===
+
'''IMPORTANT!:''' Due to the above, the station is marketed as a station with 2 DAK-pages + navigation keys
  
With its 4-line display the DualDisplay is suitable to use as a "Guard station" to receive [[Call Request]]s from [[substation]]s. The navigation keys can be configured to scroll and answer the call queue.
+
==DualDisplay station used for Call Queuing==
 +
With its 4-line display the DualDisplay is suitable to use as a "Guard station" to receive [[Call Request]]s from substations. The navigation keys can be configured to scroll and answer the call queue.
  
====<u>Configuration for Call Queuing</u>====
+
===Configuration for Call Queuing===
 
When the DualDisplay station is used for call queuing the following settings should be made in [[AlphaPro]]:
 
When the DualDisplay station is used for call queuing the following settings should be made in [[AlphaPro]]:
 
* In Users & Stations, set '''Station Type''' = "CRM"
 
* In Users & Stations, set '''Station Type''' = "CRM"
 
* In Users & Stations, select the tab 'Station Type' and set the flag '''Station use DAK-display'''
 
* In Users & Stations, select the tab 'Station Type' and set the flag '''Station use DAK-display'''
 
* In Users & Stations, press ['''DAK'''] and select the tab 'Navig. Keys'. Enter the [[Mail_Queue_Operation|queue navigation codes]] for answer, scroll and delete:
 
* In Users & Stations, press ['''DAK'''] and select the tab 'Navig. Keys'. Enter the [[Mail_Queue_Operation|queue navigation codes]] for answer, scroll and delete:
** Navigation key 1: 7638 (Answer)
+
::- Navigation key 1: 7638 (Answer)
** Navigation key 2: 7637 (Up)
+
::- Navigation key 2: 7637 (Up)
** Navigation key 3: 7639 (Down)
+
::- Navigation key 3: 7639 (Down)
** Navigation key 4: 7630 (Delete)
+
::- Navigation key 4: 7630 (Delete)
  
Note that when the Station Type is set to "CRM" there will be no notification tone upon arrival of new Call Requests (this is by design because the notification is done by separate buzzer in the [[Control Room Master IV|CRM IV station]]). Because [[Send Call Request Feature|Normal Call Request (623)]] is indicated by a bleep every minute ([[Feature reminder]]), it might be more suitable to use [[Send Call Request Feature|Alarm Call Request 622]] which is indicated by the programable [[Urgent feature reminder]].
+
Note that when the Station Type is set to "CRM" there will be no notification tone upon arrival of new Call Requests (this is by design because the notification is done by separate buzzer in the [[Control Room Master IV|CRM IV station]]). Because [[Send Call Request Feature|Normal Call Request (623)]] is indicated by a bleep every minute ([[Feature reminder]]), it might be more suitable to use [[Send Call Request Feature|Alarm Call Request 622]] which is indicated by the programmable [[Urgent feature reminder]].
  
====<u>Controlling the video-state of the DAK-display</u>====
+
===Controlling the video-state of the DAK-display===
 
The [[Event Handler]] command [[IND]] can be used to control the video-state of the DAK-display of the DualDisplay station. The video-state of each DAK key label can be controlled. The options are normal video (default), inverse video, slow flash normal/inverse video and fast flash normal/inverse video.
 
The [[Event Handler]] command [[IND]] can be used to control the video-state of the DAK-display of the DualDisplay station. The video-state of each DAK key label can be controlled. The options are normal video (default), inverse video, slow flash normal/inverse video and fast flash normal/inverse video.
  
Line 227: Line 233:
 
<br>
 
<br>
  
====<u>Move to DAK page when receiving Call Request</u>====
+
===Move to DAK page when receiving Call Request===
=====<u>Analog Dual Display station</u>=====
+
====Analog Dual Display station====
*Use Event Handler and $DSPL Command to select DAK page
+
Use Event Handler and $DSPL Command to select DAK page
 +
 
 
  $DSPL L104 U3 500400 <nowiki>''</nowiki>
 
  $DSPL L104 U3 500400 <nowiki>''</nowiki>
*This will select DAK page 4 on station 104  
+
 
:*U3 = 3 bytes (50 04 00)
+
This will select DAK page 4 on station 104  
:*50 = ‘page select’-command  
+
*U3 = 3 bytes (50 04 00)
:*04 = page number (01, 02, 04, 05, 06, 07, 08, 09, 0A)
+
:-50 = ‘page select’-command  
:*00 = Define the Arrow Up/Down in the DAK display
+
:-04 = page number (01, 02, 04, 05, 06, 07, 08, 09, 0A)
 +
:-00 = Define the Arrow Up/Down in the DAK display
 
::*00 = No Arrows in DAK display
 
::*00 = No Arrows in DAK display
 
::*When this number is higher than the selected page number, an up- and down-arrow will be displayed if page number > 1
 
::*When this number is higher than the selected page number, an up- and down-arrow will be displayed if page number > 1
Line 249: Line 257:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
*When DualDisplay receive a call request
+
When DualDisplay receive a call request
 
:*display shows correct DAK page
 
:*display shows correct DAK page
 
:*DAK text is fast flashing
 
:*DAK text is fast flashing
Line 255: Line 263:
 
  IND %1.phy %1.dak(I%2.dir) 1 3
 
  IND %1.phy %1.dak(I%2.dir) 1 3
  
=====<u>IP Dual Display station</u>=====
+
====IP Dual Display station====
 
 
 
Use Event Handler and $DIP Command to select DAK page:
 
Use Event Handler and $DIP Command to select DAK page:
  
Line 268: Line 275:
 
* 6 = max page: Maximum number of pages configured for the station (Arrow configuration). 0 means no arrows will be displayed.
 
* 6 = max page: Maximum number of pages configured for the station (Arrow configuration). 0 means no arrows will be displayed.
  
===<u>Write to the display</u>===
+
==Write to the display==
====<u>Analog Dual Display Station</u>====
+
===Analog Dual Display Station===
 
Use $DSPL command:
 
Use $DSPL command:
  
 
  $DSPL  L104 U11 33011302  'Hello'
 
  $DSPL  L104 U11 33011302  'Hello'
:*Displays ’Hello’ on DAK display line 2
+
*Displays ’Hello’ on DAK display line 2
::*U11: Length of data to be sent (11 bytes)
+
**U11: Length of data to be sent (11 bytes)
::*33: write to multi display system (Constant)
+
**33: write to multi display system (Constant)
::*01: Display 01 (Constant)
+
**01: Display 01 (Constant)
::*13: write text (Constant)
+
**13: write text (Constant)
::*02: DAK-line 02 (range 01-64 in hex, which is 1-100 decimal)
+
**02: DAK-line 02 (range 01-64 in hex, which is 1-100 decimal)
  
 
NOTE: text written this way maybe overwritten by an exchange display update
 
NOTE: text written this way maybe overwritten by an exchange display update
  
====<u>IP Dual Display Station</u>====
+
===IP Dual Display Station===
 +
{{note|This function is currently not supported fully. You can write to the display, but then all the other lines will be cleared}}
 
  $DIP L104 'dakte 2 "Hello"'
 
  $DIP L104 'dakte 2 "Hello"'
:*Displays ’Hello’ on DAK display line 2
+
*Displays ’Hello’ on DAK display line 2
::*2 DAK-line 02 (range 01-64 in hex, which is 1-100 decimal)
+
:-2 DAK-line 02 (range 01-64 in hex, which is 1-100 decimal)
  
 
Note that line number is in hex, line 10 is "dakte A".
 
Note that line number is in hex, line 10 is "dakte A".
 +
 +
[[Category:INCA Station Configuration Guide]]
 +
[[Category:Analogue Station - Configuration Guides]]

Latest revision as of 08:32, 10 December 2021

AlphaCom icon 300px.png

Application

The Dual Display station is primary intended to be used as a table top station in bank / finance environment and offices where quick access to several preprogrammed extension numbers and functions is essential.

The direct access key display text can be edited

Dual Display Station 1007007000 Application.jpg


The principal

DAK-labelling is stored in the station memory

  • Labels are sent from the exchange as display data

The station recognises 10 DAK-pages

DAK-page 3 reserved for the 4 function keys

  • DAK-buttons 21-24, buttons 25-30 are unused

The dialling code sent on the abcd-wires (for analogue stations) depends on the selected DAK-page

DAK-keys in the AMC

Each station has a DAK-table with 24 lines (from AMC9)

  • 20 lines are for general use (1-20)
  • 4 lines are reserved for navigation keys

More DAK keys can be reached via re-direction

DAK-redirection

Only DAK 1-10 can be used for redirection of DAK keys to other stations. DAK 11-20 cannot be used for redirection.

DD DAK redir.PNG

DAK page 1 is DAK 1-10 on station 501
DAK page 2 is DAK 1-10 on station 502

DAK page 3 is DAK 1-10 on station 503
DAK page 4 is DAK 1-10 on station 504
DAK page 5 is DAK 1-10 on station 505
DAK page 6 is DAK 1-10 on station 506
DAK page 7 is DAK 1-10 on station 507
DAK page 8 is DAK 1-10 on station 508
DAK page 9 is DAK 1-10 on station 509


NOTE: 9544 (101/2) must be changed to 101/10 to have 9 DAK pages! See also below.


Station definition in AlphaPro

DualDisplayConfig1.png


Navigation keys

Navigation keys will automatically be programmed when station type DualDisplay is selected.

Bilde4.jpg
DD NaviKeys1.PNG


Navigation keys – Arrows

Use ‘Arrow Up’ and ‘Arrow Down’ to select DAK page

  • Arrow Down = DAK 22 = 9543 (101/1)
  • Arrow Up = DAK 23 = 9544 (101/2)

Parameter options for feature 101:

  • 2 – 10 (not 3)
  • Move to another page in the direction of the parameter; maximum page number is parameter
  • 101 – 110 (not 103)
  • Direct selection of DAK page 1 – 10 (not 3)

Navigation keys – Menus

Menu = DAK 21 = 60 (21/0)

  • Group menu - 610
  • Absent menu - 611
  • Mail menu - 612
  • Program menu - 613
  • Conferences - 618
  • Person menu - 614
  • Feature menu - 615
  • Service menu - 616

Name = DAK 24 = 9542 (21/12)

  • Alpha Numeric Search - 9537 (21/13)
  • Program DAK - 9541 (32/128)
  • Edit DAK text - 9540 (100/0)
Bilde5.jpg


Navigation keys

The navigation DAK keys operate differently in Idle than inside a Menu

  • From idle:
  • Navigation keys operate as programmed on DAK 21-24
  • In all menus:
  • DAK 21: Select / OK
  • DAK 22: Arrow Up
  • DAK 23: Arrow Down
  • DAK 24: Context sensitive Cancel/Esc
  • Not user programmable
  • The navigation key labelling can be altered in the MDF-file
Bilde6.jpg


Default directory numbers

Dual Display Station default directory numbers, display texts and features

DAK Labels

3 text types for DAK Display

  • User defined text programmed in the DAK string
-Text programmed from AlphaPro or from the station
  • Display the 8 first letters of the display text related to the directory number assigned to the DAK key
  • Display the directory number assigned to the DAK key
Bilde7.jpg


DAK programming – AlphaPro

T-command in DAK-string: I 102 TDoor A4

  • DAK label = “Door A4”
  • Max DAK-string length: 19 char.
  • Max label length: 8 characters
  • Must be the last command in the string
DualDisplayConfig3.png
DualDisplayConfig6.png



DAK-string without T-command: I 102

  • DAK label = the first 8 characters of the display text of 102
  • Only available when programmed as directory number from Idle (“I”)
DualDisplayConfig2.png
DualDisplayConfig5.png



Station flag ‘DAK display show directory number’ is set:

  • DAK label = directory number instead of display text
  • Only available when programmed as directory number from Idle (“I”)
DualDisplayConfig4.png
DualDisplayConfig7.png


DAK programming – Station(1)

Assign directory number to DAK-key

  • Press ‘Name’, + arrow-down to select ‘ProgramKey’, followed by OK
  • Enter the directory number
  • Press the DAK-key
Bilde11.jpg


Delete the DAK-key programming

  • Press ‘Name’, + arrow-down to select ‘ProgramKey’, followed by OK
  • Press the DAK-key to be deleted
  • Confirm by pressing ‘Del’

The 784 + number + DAK is also possible to use

Bilde12.jpg


DAK programming – Station(2)

Program a DAK label from the station

  • Press ‘Name’, + arrow-up to select ‘EditDAKText’, followed by OK
  • Press the DAK-key
  • Use the station keyboard to enter the text, maximum 8 characters
  • Backspace and space can be entered via the arrow keys
  • Confirm with OK
Bilde13.jpg


Bilde14.jpg


DAK page limits

  • The station is designed for 10 DAK-pages
  • DAK-page 3 is fixed for navigation key use
  • DAK keys 1-24 (the first 2 pages and the navigation keys) can also be used during conversation
  • DAK keys 31-50 are OK from idle. Features during conversation (e.g. door opening) sometimes fails
  • DAK keys 51-100 are OK from idle. Features during conversation (e.g. door opening) always fails
IMPORTANT!: Due to the above, the station is marketed as a station with 2 DAK-pages + navigation keys

DualDisplay station used for Call Queuing

With its 4-line display the DualDisplay is suitable to use as a "Guard station" to receive Call Requests from substations. The navigation keys can be configured to scroll and answer the call queue.

Configuration for Call Queuing

When the DualDisplay station is used for call queuing the following settings should be made in AlphaPro:

  • In Users & Stations, set Station Type = "CRM"
  • In Users & Stations, select the tab 'Station Type' and set the flag Station use DAK-display
  • In Users & Stations, press [DAK] and select the tab 'Navig. Keys'. Enter the queue navigation codes for answer, scroll and delete:
- Navigation key 1: 7638 (Answer)
- Navigation key 2: 7637 (Up)
- Navigation key 3: 7639 (Down)
- Navigation key 4: 7630 (Delete)

Note that when the Station Type is set to "CRM" there will be no notification tone upon arrival of new Call Requests (this is by design because the notification is done by separate buzzer in the CRM IV station). Because Normal Call Request (623) is indicated by a bleep every minute (Feature reminder), it might be more suitable to use Alarm Call Request 622 which is indicated by the programmable Urgent feature reminder.

Controlling the video-state of the DAK-display

The Event Handler command IND can be used to control the video-state of the DAK-display of the DualDisplay station. The video-state of each DAK key label can be controlled. The options are normal video (default), inverse video, slow flash normal/inverse video and fast flash normal/inverse video.

Format of the IND command:

  • IND x y 1 z
  • x = physical station (1 - 552)
  • y = DAK-line (1-100)
  • z = video-state
  • z = 0: Normal
  • z = 1: Inverse
  • z = 2: Slow flash
  • z = 3: Fast flash


Configuration example:
When receiving a Call Request, the DAK key label of the calling substation should flash fast.
Create an event with the following parameters:

Event Owner: The DualDisplay station
Event type: 10 – Received mail
Subevent: 0
When change to: ON or OFF
When related to: All
Action: IND %1.phy %1.dak(I%2.dir) 1 3


Move to DAK page when receiving Call Request

Analog Dual Display station

Use Event Handler and $DSPL Command to select DAK page

$DSPL L104 U3 500400 ''

This will select DAK page 4 on station 104

  • U3 = 3 bytes (50 04 00)
-50 = ‘page select’-command
-04 = page number (01, 02, 04, 05, 06, 07, 08, 09, 0A)
-00 = Define the Arrow Up/Down in the DAK display
  • 00 = No Arrows in DAK display
  • When this number is higher than the selected page number, an up- and down-arrow will be displayed if page number > 1
  • Examples:
- 500405 = Page 4 with Arrow Up and Down
- 500404 = Page 4 with Arrow Down
- 500403 = Page 4 with Arrow Down
- 500104 = Page 1 with Arrow Up
- 500400 = Page 4 with no Arrows

Use as CRM - Example:

DD Event1.PNG


When DualDisplay receive a call request

  • display shows correct DAK page
  • DAK text is fast flashing
$DSPL L%1.dir U3 50 %op(%op(%op(%1.dak(I%2.dir),-,1),/,10),+,1) 00 ''
IND %1.phy %1.dak(I%2.dir) 1 3

IP Dual Display station

Use Event Handler and $DIP Command to select DAK page:

$DIP L101 "dakpage 5 6"
$DIP L%1.dir "dakpage %op(%op(%op(%1.dak(I%2.dir),-,1),/,10),+,1) 10"


This command means: show DAK page 5 of 6 on station 101.

  • 5 = page no: DAK page number to activate 1 - 10.
  • 6 = max page: Maximum number of pages configured for the station (Arrow configuration). 0 means no arrows will be displayed.

Write to the display

Analog Dual Display Station

Use $DSPL command:

$DSPL  L104 U11 33011302  'Hello'
  • Displays ’Hello’ on DAK display line 2
    • U11: Length of data to be sent (11 bytes)
    • 33: write to multi display system (Constant)
    • 01: Display 01 (Constant)
    • 13: write text (Constant)
    • 02: DAK-line 02 (range 01-64 in hex, which is 1-100 decimal)

NOTE: text written this way maybe overwritten by an exchange display update

IP Dual Display Station

Note icon This function is currently not supported fully. You can write to the display, but then all the other lines will be cleared


$DIP L104 'dakte 2 "Hello"'
  • Displays ’Hello’ on DAK display line 2
-2 DAK-line 02 (range 01-64 in hex, which is 1-100 decimal)

Note that line number is in hex, line 10 is "dakte A".