I/O Settings (Edge): Difference between revisions

Latest revision as of 10:17, 12 January 2024

The Turbine range of stations have configurable I/O's, i.e. you can choose if an I/O should be used as an Input or as an Output. By default all I/O's are set as Inputs.

When configured to be an Input, the input actions are configured from Direct Access Key Settings.
When configured to be an Output, the output operation is configured from the Edge Controller in an Edge system.

By default an input is triggered by a closing contact (referred to as "NO - Normally Open"). The input can be configured as "Input NC" (NC - Normally Closed) instead. (Requires firmware 8.1.3.0 or later).

Enable Advanced Configuration mode, and select Edge Configuration > I/O from the menu

I/O settings web page

For each of the six I/O pins the options are:

Input (default)
Input NC
Output

Use Inputs As Key Matrix

If there is a need for more than the 6 inputs available, it is possible to use the Use Inputs As Key Matrix and combine inputs as in a diode matrix, and in this way create more DAKs. By for example using 3 inputs it is possible to get 7 DAKs.

This is enabled in Advanced Configuration Mode and IO Settings:

Enable IO Matrix

The different options are:

2 Inputs (input 1-2, DAK 1-3)

Input 2	Input 1	DAK key triggered
0	1	DAK1
1	0	DAK2
1	1	DAK3
0	0	Last DAK released

3 Inputs (input 1-3, DAK 1-7):

Diode matrix when using 3 inputs to activate 7 DAK keys

Input 3	Input 2	Input 1	DAK key triggered
0	0	1	DAK1
0	1	0	DAK2
0	1	1	DAK3
1	0	0	DAK4
1	0	1	DAK5
1	1	0	DAK6
1	1	1	DAK7
0	0	0	Last DAK released

4 Inputs (input 1-4, DAK 1-15):

Input 4	Input 3	Input 2	Input 1	DAK key triggered
0	0	0	1	DAK1
0	0	1	0	DAK2
0	0	1	1	DAK3
0	1	0	0	DAK4
0	1	0	1	DAK5
0	1	1	0	DAK6
0	1	1	1	DAK7
1	0	0	0	DAK8
1	0	0	1	DAK9
1	0	1	0	DAK10
1	0	1	1	DAK11
1	1	0	0	DAK12
1	1	0	1	DAK13
1	1	1	0	DAK14
1	1	1	1	DAK15
0	0	0	0	Last DAK released

The DAK actions are configured from Direct Access Key Settings.

@@ Line 1: / Line 1: @@
 {{E}}
 The [[:Category:Stations#Turbine_stations|Turbine range of stations]] have configurable I/O's, i.e. you can choose if an I/O should be used as an Input or as an Output. By default all I/O's are set as Inputs.
-* When configured to be an '''Input''', the input actions are configured from [[Direct Access Key & Ringlist Settings (Edge)|Direct Access Key Settings]] (an input behaves like a push button).
+* When configured to be an '''Input''', the input actions are configured from [[Direct Access Key & Ringlist Settings (Edge)|Direct Access Key Settings]].
-* When configured to be an '''Output''', the output operation is configured from the [[Relay Settings (Edge)|Edge Controller in an Edge system]], but locally in the station when used in SIP mode.
+* When configured to be an '''Output''', the output operation is configured from the [[Relay Settings (Edge)|Edge Controller in an Edge system]].
-Select '''SIP Configuration > I/O''' from the menu
+By default an input is triggered by a closing contact (referred to as "NO - Normally Open"). The input can be configured as "Input NC" (NC - Normally Closed) instead. (Requires firmware 8.1.3.0 or later).
-[[File:IOsettings.png|thumb|left|500px]]
+Enable [[Advanced Configuration Mode (Edge)|Advanced Configuration]] mode, and select '''Edge Configuration > I/O''' from the menu
+[[File:Edge IOs.PNG|thumb|left|700px|I/O settings web page]]
 <br style="clear:both;" />
-* Select either '''Input''' or '''Output''' options from the drop-down box for '''I/O Pins''' 1 to 6.
+For each of the six I/O pins the options are:
+* '''Input''' (default)
+* '''Input NC'''
+* '''Output'''
 ===Use Inputs As Key Matrix===
-If there is a need for more than the 6 inputs available, it is possible to use the '''Use Inputs As Key Matrix''' and combine inputs as in a diode matrix, and in this way create more DAKs.
+If there is a need for more than the 6 inputs available, it is possible to use the '''Use Inputs As Key Matrix''' and combine inputs as in a diode matrix, and in this way create more DAKs. By for example using 3 inputs it is possible to get 7 DAKs.
-By for example using 3 inputs it is possible to get 7 DAKs.
+This is enabled in [[Advanced_Configuration_Mode_(Edge)|Advanced Configuration Mode]] and IO Settings:
+[[File:Edge IOsMatrix.PNG|thumb|left|700px|Enable IO Matrix]]
+<br style="clear:both;" />
 The different options are:
 *2 Inputs (input 1-2, DAK 1-3)
-{| border="1" {{table}}
+{| border="1"
 | align="center" style="background:#ffd400;"|'''Input 2'''
 | align="center" style="background:#ffd400;"|'''Input 1'''
@@ Line 35: / Line 45: @@
 *3 Inputs (input 1-3, DAK 1-7):
 [[File:IO as matrix.png|thumb|right|500px|Diode matrix when using 3 inputs to activate 7 DAK keys]]
-{| border="1" {{table}}
+{| border="1"
 | align="center" style="background:#ffd400;"|'''Input 3'''
 | align="center" style="background:#ffd400;"|'''Input 2'''
@@ Line 60: / Line 70: @@
 *4 Inputs (input 1-4, DAK 1-15):
-{| border="1" {{table}}
+{| border="1"
 | align="center" style="background:#ffd400;"|'''Input 4'''
 | align="center" style="background:#ffd400;"|'''Input 3'''
@@ Line 102: / Line 112: @@
 The DAK actions are configured from [[Direct Access Key & Ringlist Settings (Edge)|Direct Access Key Settings]].
-The input matrix function require '''Turbine software 4.7''' or later.
 [[Category: IC-EDGE Configuration]]

I/O Settings (Edge): Difference between revisions

From Zenitel Wiki

Latest revision as of 10:17, 12 January 2024

Use Inputs As Key Matrix