CALL SETUP

CALL_SETUP		0x0008	8	AMC 08.20
$CALL L101 L102 $CALL L101 L102 W32 $CALL L101 L102 W64 $CALL L101 L102 W0 0 1			Let 101 call 102 Let 101 call, ignore if 102 forwards Let 101 call 102, force both 101 and 102 Let 101 call 102, force private ringing
$CALL_SETUP sets up a conversation like dialing from a station. Default behavior: A station is disconnected if busy Call can result in Private ringing, Absent, Busy or Transfer like a ordinary call The A station's call priority in NVRAM is used. No acknowledge messages are returned $CONN_REQUEST/$CONN is retained for compatibility only, CALL_SETUP is the preferred message now.
1	NET_OBJ_REF {ECL_STATION, ECL_USER}	A - user or station.
2	NET_OBJ_REF {ECL_STATION, ECL_USER, ECL_O_DUPL_CONF}	B - user or station or Duplex_Conference
3	UINT2 (optional)	Call mode options (default zero) Call mode options can be the sum of the following:<BR\> 1: Return CONN_REFERENCE, STATION_DOWN or STATION_BUSY. Send DISCONNECTED at disconnect (CSF_RETURN_ACK) 2: Require CONN_REF_ACK and DISCONNECTED_ACK (CSF_3WAY_ACK) 4: Reserved 8: This is a transfer of a billed call. Param#6 then carries the nodenumber of the billing node 16: Do not disconnect A station if busy (CSF_NOT_FORCE_A) 32: Do not follow call forwarding (CSF_NO_FORWARD) 64: Used internally for transfer call, answer group call (CSF_TRANSFER_CALL) Forces both A and B stations. 128: Force call in Open Duplex mode (CSF_OPEN_DUPLEX) (AMC 09.03) 256: Start a silence call to an IP station. No LED or loudspeaker turned on the B party. (AMC 11.02.03.01) 512: Force Fixed Open Duplex mode (M key an Hook does not affect the Open Duplex conversation) (AMC 11.02.03.02)
4	UINT1 (optional)	Allocation priority of A station. Zero or omitted means that the NVRAM priority of A station is used,Users & Stations (AlphaPro). Priority 4 gives Busy override of A station. Priority 1,2,3 gives normal allocation.
5	UINT1 (optional)	Call priority towards B station. Value 1 - 4. Value zero or omitted means that the NVRAM priority of A station is used, Users & Stations (AlphaPro).
6	NET_OBJ_REF {ECL_STATION} (optional)	B Station if User B is not at own station.
Response		CONN_REFERENCE, STATION_DOWN or STATION_BUSY, or none

See also:' $CALL command used in AlphaNet (Event Handler)

Back to AlphaNet message list