Revision as of 07:44, 26 October 2016

IP Video Station, item 1401110200

Camera Type: Axis

Installation

Default IP adresses:
- Audio module: 169.254.1.100 (admin/alphaadmin)
- Camera module: 169.254.1.101 (admin/1234)

Connect to the camera using a webbrowser on default IP address 169.254.1.101.

In the menu that appears, click System Settings, and you will be asked to login:

Username: admin
Password: 1234

It is recommended to use a static IP address for the camera:

Setting Static IP Address

From the Main Menu navigate to Video Stream:

Axis camera configuration

@@ Line 80: / Line 80: @@
 <br style="clear:both;" />
-==Axis Factory Reset==
-After a factory default, the Axis camera will get its IP address from a '''DHCP''' server.<br>
-If there is no DHCP server on the network, it will get the IP address '''192.168.0.90'''.
-To restore the factory settings, proceed as follows:
-:1. Disconnect the camera from the power supply and ethernet.
-:2. Remove the four screws securing the rear cover and remove it.
-:3. Keep the Control button pressed while you restore the power supply.
-:4. Hold down the button for about 15 seconds until the status LED is yellow flashing.
-:5. Release the Control Button. The process is complete when the status LEDs light up green.
-[[File:Axis.PNG|thumb|left|500px]]
-<br style="clear:both;" />
- ''If no DHCP server is active on your network the new default IP is '''192.168.0.90'''.''
- ''The new default user is '''root''' with password '''pass'''''
 [[Category: INCA Stations]]