1-4j. RCO, Call indication (solution)

System configuration

Solution

Private Ringing indication

• When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.).
• The lamp should be turned off when the private ringing stops.
• Use logical RCO 10 to operate the relay

Step 1 is to map the logical RCO 10 to the relay of station 400:

Call Queue indication *When the Main Guard receives a Call Request, the same lamp should be activated to indicate that there is one or more calls in the call queue (Tip: Use event "Priority Mail Present").

• The lamp should be turned off when there are no more calls in the queue.

---

Related articles

• 1-4j. RCO, Call indication (practice)