Difference between revisions of "TA-10"
From Zenitel Wiki
(→Configuration) |
(→Configuration) |
||
| Line 19: | Line 19: | ||
'''AlphaCom Mode''': | '''AlphaCom Mode''': | ||
* Use the [[AlphaPro]] tool, and go to '''Exchange & System''' > '''RCO''' | * Use the [[AlphaPro]] tool, and go to '''Exchange & System''' > '''RCO''' | ||
| − | * The two relays must be mapped in the RCO table as pin 9 and pin 10 | + | * The two relays must be mapped in the RCO table as pin 9 and pin 10 |
| + | * See [[RCO - Remote Control Output]] for more details | ||
| Line 25: | Line 26: | ||
* Log on to the web interface of the station | * Log on to the web interface of the station | ||
* Select '''SIP Configuration''' > '''Relay Settings''', select '''Relay 3''' or '''Relay 4''', and configure which event should operate the relay | * Select '''SIP Configuration''' > '''Relay Settings''', select '''Relay 3''' or '''Relay 4''', and configure which event should operate the relay | ||
| + | * See [[RCO - Remote Control Output]] for more details | ||
==Dimensions== | ==Dimensions== | ||
Revision as of 12:56, 2 February 2017
TA-10 is a Relay Module to be used with Turbine Industrial stations TFIE-1 and TFIE-2, and the Turbine kits TKIE-1 and TKIE-2.
Highlights
- Designed for use with Turbine Industrial stations TFIE-x, and the Turbine kits TKIE-x
- Fits inside the TFIE Industrial stations (Bracket included in the TFIE station)
- Dual high-power relays (DPDT)
- Up to 400VAC /48 VDC per relay
- Up to 6A current per relay
- Heavy-duty spring-loaded terminals with spare grounding terminals
- Powered by Turbine Industrial stations (TFIE-x) or Turbine Extended Kit (TKIE-x)
Connection
- Use the cable that comes with the TA-10, and connect one end to the Turbine Extended Board (Connector J2), and the other end to the TA-10 board as indicated in the drawing below
Configuration
AlphaCom Mode:
- Use the AlphaPro tool, and go to Exchange & System > RCO
- The two relays must be mapped in the RCO table as pin 9 and pin 10
- See RCO - Remote Control Output for more details
SIP or Pulse mode:
- Log on to the web interface of the station
- Select SIP Configuration > Relay Settings, select Relay 3 or Relay 4, and configure which event should operate the relay
- See RCO - Remote Control Output for more details
Dimensions
- Dimensions (WxHxD): 100 x 50 x 40 mm
- Weight: 0.1 kg