Difference between revisions of "AMC-IP software upgrade (Black AMC-IP board)"
From Zenitel Wiki
(→Software Upgrade) |
(→Software Upgrade) |
||
Line 15: | Line 15: | ||
== Software Upgrade == | == Software Upgrade == | ||
− | * [[Downloads#AlphaCom_.28AMC-IP.29_software|Download]] the file bsp_32.00.3.1_AS_12.5.3.0.apkg. This file contains the AMC-IP software version 12. | + | * [[Downloads#AlphaCom_.28AMC-IP.29_software|Download]] the file bsp_32.00.3.1_AS_12.5.3.0.apkg. This file contains the AMC-IP software version 12.5.3.0, as well as security updates. |
* Use an internet browser and [[AlphaWeb#AlphaWeb_Login|log on]] to the AlphaCom Web interface ([[AlphaWeb]]) and select '''System Maintenance ''' -> '''System Upgrade'''. | * Use an internet browser and [[AlphaWeb#AlphaWeb_Login|log on]] to the AlphaCom Web interface ([[AlphaWeb]]) and select '''System Maintenance ''' -> '''System Upgrade'''. | ||
* '''Browse''' to the downloaded file, and select '''Upload'''. The file will now be transferred from the PC to the AMC-IP board. | * '''Browse''' to the downloaded file, and select '''Upload'''. The file will now be transferred from the PC to the AMC-IP board. |
Revision as of 15:53, 29 May 2018
This article describes how to upgrade the software in an AlphaCom server, running a black AMC-IP board (hardware revision 5 or later).
This is the currently produced AMC-IP board. It replaced the red AMC-IP board (hardware revision 4) in 2010.
The software 12.5.3.0 is supported only on the black AMC IP boards. The red AMC-IP board is not supported.
Backup customer data
Configuration data will get lost after the upgrade.
The customer data MUST be backed up by doing a GetAll operation from AlphaPro before the upgrade is performed.
Software Upgrade
- Download the file bsp_32.00.3.1_AS_12.5.3.0.apkg. This file contains the AMC-IP software version 12.5.3.0, as well as security updates.
- Use an internet browser and log on to the AlphaCom Web interface (AlphaWeb) and select System Maintenance -> System Upgrade.
- Browse to the downloaded file, and select Upload. The file will now be transferred from the PC to the AMC-IP board.
- When the upload is finished an Install button will appear. Press the Install button, the upgrade status is shown in the web browser.
- When the software installation is finished the system will restart with the new software.
Restore customer data
Restore the customer data by doing a SendAll operation from AlphaPro. Reset the exchange when the SendAll is finished.