Difference between revisions of "IP-LCM"
From Zenitel Wiki
(→Configuration) |
|||
| Line 5: | Line 5: | ||
The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.<br/> | The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.<br/> | ||
| − | * 8 relay outputs | + | * 8 relay outputs |
* 8 control inputs | * 8 control inputs | ||
* Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG | * Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG | ||
* Device powered via the TKIS-2 kit using PoE or local power | * Device powered via the TKIS-2 kit using PoE or local power | ||
| − | * All TKIS-2 features available | + | * All TKIS-2 features available, icluding: |
| + | ** 1 relay | ||
| + | ** 6 inputs | ||
== Software requirements == | == Software requirements == | ||
Revision as of 13:49, 25 April 2019
The IP-LCM module is an expansion to the TKIS-2, and adds high power relays and robust control inputs to the kit without extra wiring.
DIN-rail mounting allows for a flexible I/O device that reduces the amount of wiring for I/O inside racks and other systems.
The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.
- 8 relay outputs
- 8 control inputs
- Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG
- Device powered via the TKIS-2 kit using PoE or local power
- All TKIS-2 features available, icluding:
- 1 relay
- 6 inputs
Contents
Software requirements
The IP-LCM is fully supported as from ver 4.11.