Difference between revisions of "Upgrade from Pulse to IC-EDGE"
From Zenitel Wiki
| Line 1: | Line 1: | ||
{{Cons}} | {{Cons}} | ||
| + | This article describes how to upgrade from Pulse (VS-IS 4.x) to IC-EDGE. | ||
| + | |||
| + | == Prerequisite == | ||
| + | |||
| + | * You can upgrade from Pulse (VS-IS 4.x) to IC-EDGE, but the whole system needs to run with the same Turbine software (VS-IS 5.0). | ||
| + | * In an IC-EDGE System, INCA intercoms cannot be used as the Edge Controller. | ||
| + | * TCIV video intercoms should not be used as the Edge Controller for systems exceeding 4 devices. | ||
| + | * VS-IMT can be used for station discovery and upgrade but must not be used to configure IC-EDGE. | ||
| + | |||
| + | == Pulse to IC-EDGE Licenses == | ||
| + | Pulse licenses will be honored in an IC-EGDE System. This means that when you upgrade firmware from VS-IS 4.x to 5.x your Pulse licenses will work for IC-EDGE. <br> | ||
| + | More information regarding licensing in IC-EDGE can be found [[Licensing_in_IC-EDGE|here]]. | ||
| − | |||
[[Category: IC-EDGE Configuration]] | [[Category: IC-EDGE Configuration]] | ||
Revision as of 10:06, 10 September 2019
|
This article is under construction! |
This article describes how to upgrade from Pulse (VS-IS 4.x) to IC-EDGE.
Prerequisite
- You can upgrade from Pulse (VS-IS 4.x) to IC-EDGE, but the whole system needs to run with the same Turbine software (VS-IS 5.0).
- In an IC-EDGE System, INCA intercoms cannot be used as the Edge Controller.
- TCIV video intercoms should not be used as the Edge Controller for systems exceeding 4 devices.
- VS-IMT can be used for station discovery and upgrade but must not be used to configure IC-EDGE.
Pulse to IC-EDGE Licenses
Pulse licenses will be honored in an IC-EGDE System. This means that when you upgrade firmware from VS-IS 4.x to 5.x your Pulse licenses will work for IC-EDGE.
More information regarding licensing in IC-EDGE can be found here.