Difference between revisions of "COPY MAIL"
From Zenitel Wiki
| Line 26: | Line 26: | ||
[[Category: ACDP messages]] | [[Category: ACDP messages]] | ||
| + | [[Category: DP Commands]] | ||
[[AlphaNet_Data_Protocol#Station_Mail_Operations|Back to AlphaNet message list]] | [[AlphaNet_Data_Protocol#Station_Mail_Operations|Back to AlphaNet message list]] | ||
Latest revision as of 11:58, 30 June 2022
| COPY_MAIL | 0x0083 | 131 | AMC 08.10 | |
|---|---|---|---|---|
| $CPYM L101 W0000 L102 $CPYM L%1.DIR W%2.TAG L102 U255 |
. example use in MAIL_TIMEOUT event | |||
| Send a copy of a mail in own queue to a new destination (station or group). Intended use: After MAIL_TIMEOUT, forward a Call Request to another queue (or, for example, to own queue with increased priority). | ||||
| 1 | NET_OBJ_REF {ECL_STATION} |
Source station. | ||
| 2 | UINT2 | Mail tag (unique id) for current queue entry. | ||
| 3 | NET_OBJ_REF {ECL_STATION, ECL_ST_GROUP} |
Destination station or local group . . | ||
| 4 | UINT1 (optional) |
Change Mail Priority 0-255. If this parameter is specified, the priority field in the mail copy is changed before it’s sent to its destination. | ||
| 5 | UINT1 (optional) |
Change Mail Flags. If this parameter is specified, the mail flags field in the mail copy is changed before it’s sent to its destination. See SEND_MAIL for meaning of Mail Flags. | ||
| Response: | COMMAND_RESPONSE Success if mail sent, failure if no-such-tag. | |||