Difference between revisions of "MAC address (ICX and AlphaCom servers)"
From Zenitel Wiki
| Line 2: | Line 2: | ||
This MAC address is used by ethernet port 0 (Eth0). The MAC address of ethernet port 1 (Eth1) is generated by adding 80:00:00. | This MAC address is used by ethernet port 0 (Eth0). The MAC address of ethernet port 1 (Eth1) is generated by adding 80:00:00. | ||
| − | It is always the MAC address of Eth0 which is refereed to when dialing [[Station ID feature|789]] on a display station, and in [[ | + | It is always the MAC address of Eth0 which is refereed to when dialing [[Station ID feature|789]] on a display station, and in the web interface, [[ICX_Web#Node_Information|System Monitoring > Node information]] and in 'System Configuration > License key'. |
The MAC address of Eth1 is found in 'System Configuration > Interfaces'. | The MAC address of Eth1 is found in 'System Configuration > Interfaces'. | ||
Revision as of 08:19, 11 May 2022
Each of the two ethernet ports in the ICX-500 or in the [[AlphaCom Servers] has an unique MAC address. Zenitel has a MAC address range from 00:13:CB:00:00:00 to 00:13:CB:FF:FF:FF.
This MAC address is used by ethernet port 0 (Eth0). The MAC address of ethernet port 1 (Eth1) is generated by adding 80:00:00.
It is always the MAC address of Eth0 which is refereed to when dialing 789 on a display station, and in the web interface, System Monitoring > Node information and in 'System Configuration > License key'. The MAC address of Eth1 is found in 'System Configuration > Interfaces'.
If the MAC address is to be used for instance for firewall rules, it is important to provide the IT-administrator with the correct MAC address.