Difference between revisions of "TKIS Connections"
From Zenitel Wiki
(→Input/Output Connections) |
|||
| Line 44: | Line 44: | ||
These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems. | These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems. | ||
| − | See also [[Turbine Compact | + | See also [[Turbine Compact series board connectors]] |
[[Category: Turbine Connections]] | [[Category: Turbine Connections]] | ||
Latest revision as of 10:22, 23 June 2023
This article describes the connections of the TKIS-2 kit.
The TKIS-2 kit is also used inside Zenitel IP Loudspeakers.
| Ethernet/Power | 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
| Secondary Power | 24 VDC (16 – 48 V) secondary power is provided from an external adapter. |
| Relays | Double Throw (SPDT) relay contact with 60W switching power. Max: 250VAC/220VDC, 2A, 60W |
| Input/Output | 6 general purpose I/Os. Each I/O can be configured as either input or 12mA LED driver output. |
| Audio Line Out | A balanced 600 ohm audio line out suitable for e.g. external amplifier or induction loop amplifier |
- When the Turbine Kit is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
- To make the kit speak its IP address:
- connect a speaker to the speaker output
- connect a button to input 1
- press the button after startup
Network Connection
There is one RJ-45 port located on the Turbine Compact Kit that is used for PoE/LAN Ethernet connection.
Power Supply (optional)
The Turbine Compact Kit supports Power over Ethernet (PoE). If PoE is not available, the Turbine Compact Kit can be powered from a 24 VDC local power supply.
Input/Output Connections
There are 6 I/O connection options for the Turbine Compact Kit. These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.