Difference between revisions of "MB-30G"
From Zenitel Wiki
(→Configuration) |
(→Configuration) |
||
| Line 11: | Line 11: | ||
==Configuration== | ==Configuration== | ||
| + | The default configuration supports the gooseneck microphone, no additional configuration is required. | ||
| + | Configuration can be verified in the web interface of the ECPIR panel: | ||
* [[Logging into an Zenitel IP Device|Log in to the station web interface]] | * [[Logging into an Zenitel IP Device|Log in to the station web interface]] | ||
* Enable '''Advanced Configuration''' | * Enable '''Advanced Configuration''' | ||
| Line 17: | Line 19: | ||
* In the section '''Audio Inputs''' the Internal Microphone should be "Gooseneck Mic". | * In the section '''Audio Inputs''' the Internal Microphone should be "Gooseneck Mic". | ||
[[Image:ECPIR Gooseneck.PNG|thumb|left|700px|ECPIR Gooseneck Microphone setting]] | [[Image:ECPIR Gooseneck.PNG|thumb|left|700px|ECPIR Gooseneck Microphone setting]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 15:28, 4 September 2024
Highlights
- Electret Microphone, 2K ohm
- 5-pin DIN plug
- For use in Public Address and Talk-Back Systems
- Length: 446 mm
Installation
Insert the 5-pin DIN plug on the gooseneck microphone in the microphone connector socket on the ECPIR panel.
Configuration
The default configuration supports the gooseneck microphone, no additional configuration is required.
Configuration can be verified in the web interface of the ECPIR panel:
- Log in to the station web interface
- Enable Advanced Configuration
- Navigate to Audio Settings. Make sure "No accessory" is selected.
- In the section Audio Inputs the Internal Microphone should be "Gooseneck Mic".
Dimensions
