MPC Data Protocol: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
The AlphaCom supports a subset of the MPC Data Protocol for backward compatibility. This allowed some TouchLine generation equipment like [[PNCI]], [[MLH]] and [[CRM]] to be used with the AlphaCom. | The AlphaCom supports a subset of the MPC Data Protocol for backward compatibility. This allowed some TouchLine generation equipment like [[PNCI]], [[MLH]] and [[CRM]] to be used with the AlphaCom. | ||
=== | = Appendix: TouchLine Protocol in AlphaCom = | ||
== Availability == | |||
=== Disclaimer === | |||
=== Tips for use === | |||
== The TouchLine Protocol == | |||
=== General === | |||
=== Data Port === | |||
=== Protocol Output Format === | |||
=== Message filtering === | |||
=== Additional output messages === | |||
== TouchLine Output Messages == | |||
== TouchLine Input Messages == | |||
Revision as of 20:52, 19 June 2007
MPC Data Protocol in AlphaCom
The AlphaCom supports a subset of the MPC data protocol used with the classic Stentofon TouchLine exchanges. As it allows control of the AlphaCom exchange by mapping MPC commands to AlphaCom commands one-to-one it can be thought of as a variant of the simple link layer, but only for single-exchange (not AlphaNet) applications.
The output is broadcast of exchange events like dialled digits, station busy/free, connection and transfers. Note that it’s possible to send additional data strings from the AlphaCom’s Event Handler on this port also.
The AlphaCom supports a subset of the MPC Data Protocol for backward compatibility. This allowed some TouchLine generation equipment like PNCI, MLH and CRM to be used with the AlphaCom.