Difference between revisions of "Auto-attendant"
From Zenitel Wiki
Line 5: | Line 5: | ||
The '''Auto-attendant''' feature provides voice guided menus for handling incoming calls. | The '''Auto-attendant''' feature provides voice guided menus for handling incoming calls. | ||
− | Play a welcome message on incoming telephone calls | + | *Play a welcome message on incoming telephone calls |
− | Press a digit to re-route the call | + | *Press a digit to re-route the call |
− | Auto-transfer if no digits pressed | + | *Auto-transfer if no digits pressed |
− | Easy to activate: | + | *Easy to activate: |
− | To record welcome message: Dial 8180 + 9550 + M. Start recording. | + | *To record welcome message: Dial 8180 + 9550 + M. Start recording. |
− | Example: ”Welcome to Zenitel, press 1 for Marketing department, press 2 for Sales department, press 3 for switchboard, or wait for an answer” | + | *Example: ”Welcome to Zenitel, press 1 for Marketing department, press 2 for Sales department, press 3 for switchboard, or wait for an answer” |
− | An Auto-attendant message has to be recorded in advance, or as a part of the demo: Lift the handset of the IP desktop station and dial 8180 + 9550. (If there is an existing message, it will be played, and you can press "0" to delete it, or C if you choose to keep it). Press M to start recording. Press 8 to save. | + | *An Auto-attendant message has to be recorded in advance, or as a part of the demo: Lift the handset of the IP desktop station and dial 8180 + 9550. (If there is an existing message, it will be played, and you can press "0" to delete it, or C if you choose to keep it). Press M to start recording. Press 8 to save. |
*Dial 9550 on a station. The auto-attendant message will be played. Now you can: | *Dial 9550 on a station. The auto-attendant message will be played. Now you can: |
Revision as of 15:38, 8 September 2010
The Auto-attendant feature provides voice guided menus for handling incoming calls.
- Play a welcome message on incoming telephone calls
- Press a digit to re-route the call
- Auto-transfer if no digits pressed
- Easy to activate:
- To record welcome message: Dial 8180 + 9550 + M. Start recording.
- Example: ”Welcome to Zenitel, press 1 for Marketing department, press 2 for Sales department, press 3 for switchboard, or wait for an answer”
- An Auto-attendant message has to be recorded in advance, or as a part of the demo: Lift the handset of the IP desktop station and dial 8180 + 9550. (If there is an existing message, it will be played, and you can press "0" to delete it, or C if you choose to keep it). Press M to start recording. Press 8 to save.
- Dial 9550 on a station. The auto-attendant message will be played. Now you can:
- Press 1 to get connected to the CRMV (101)
- Press 2 to get connected to the Softclient (105)
- Or wait for 10 seconds and get connected to the CRMV.
Configuration
Directory number 9550 is included by default.
Hardware and license requiements
- Hardware: The auto-attendant feature require AMC-IP hardware version 8000/5 or 8000/6 (Black PCB).
- License: Auto-attendant requires a Basic or Enhanced Audio Messaging license.