Difference between revisions of "TA-10"
From Zenitel Wiki
(→Highlights) |
(→Configuration) |
||
| Line 18: | Line 18: | ||
==Configuration== | ==Configuration== | ||
In AlphaCom, the two relays must be mapped in the RCO table as pin 9 and pin 10. See [[RCO - Remote Control Output]] for more details. | In AlphaCom, the two relays must be mapped in the RCO table as pin 9 and pin 10. See [[RCO - Remote Control Output]] for more details. | ||
| + | |||
| + | |||
| + | '''SIP''' or '''Pulse''' mode: | ||
| + | * Log on to the stations web interface | ||
| + | * Select '''SIP Configuration''' > '''Relay Settings''', and select '''Relay 3''' or '''Relay 4'''. | ||
==Dimensions== | ==Dimensions== | ||
Revision as of 12:49, 2 February 2017
TA-10 is a Relay Module to be used with Turbine Industrial stations TFIE-1 and TFIE-2, and the Turbine kits TKIE-1 and TKIE-2.
Highlights
- Designed for use with Turbine Industrial stations TFIE-x, and the Turbine kits TKIE-x
- Fits inside the TFIE Industrial stations (Bracket included in the TFIE station)
- Dual high-power relays (DPDT)
- Up to 400VAC /48 VDC per relay
- Up to 6A current per relay
- Heavy-duty spring-loaded terminals with spare grounding terminals
- Powered by Turbine Industrial stations (TFIE-x) or Turbine Extended Kit (TKIE-x)
Connection
- Use the cable that comes with the TA-10, and connect one end to the Turbine Extended Board (Connector J2), and the other end to the TA-10 board as indicated in the drawing below
Configuration
In AlphaCom, the two relays must be mapped in the RCO table as pin 9 and pin 10. See RCO - Remote Control Output for more details.
SIP or Pulse mode:
- Log on to the stations web interface
- Select SIP Configuration > Relay Settings, and select Relay 3 or Relay 4.
Dimensions
- Dimensions (WxHxD): 100 x 50 x 40 mm
- Weight: 0.1 kg