Difference between revisions of "TA-10"

Revision as of 12:53, 2 February 2017

TA-10 is a Relay Module to be used with Turbine Industrial stations TFIE-1 and TFIE-2, and the Turbine kits TKIE-1 and TKIE-2.

Designed for use with Turbine Industrial stations TFIE-x, and the Turbine kits TKIE-x
Fits inside the TFIE Industrial stations (Bracket included in the TFIE station)
Dual high-power relays (DPDT)
Up to 400VAC /48 VDC per relay
Up to 6A current per relay
Heavy-duty spring-loaded terminals with spare grounding terminals
Powered by Turbine Industrial stations (TFIE-x) or Turbine Extended Kit (TKIE-x)

Use the cable that comes with the TA-10, and connect one end to the Turbine Extended Board (Connector J2), and the other end to the TA-10 board as indicated in the drawing below

Connecting the TA-10 Relay Unit to a TFIE station or a TKIE kit

AlphaCom Mode:

Use the AlphaPro tool, and go to Exchange & System > RCO
The two relays must be mapped in the RCO table as pin 9 and pin 10. See RCO - Remote Control Output for more details.

SIP or Pulse mode:

Log on to the web interface of the station
Select SIP Configuration > Relay Settings, and select Relay 3 or Relay 4.

@@ Line 17: / Line 17: @@
 ==Configuration==
-'''AlphaCom Mode''': Use the [[AlphaPro]] tool, and go to '''Exchange & System''' > '''RCO'''. The two relays must be mapped in the RCO table as pin 9 and pin 10. See [[RCO - Remote Control Output]] for more details.
+'''AlphaCom Mode''':
+* Use the [[AlphaPro]] tool, and go to '''Exchange & System''' > '''RCO'''
+* The two relays must be mapped in the RCO table as pin 9 and pin 10. See [[RCO - Remote Control Output]] for more details.