Difference between revisions of "INCA 2.9 - Release Notes"

Revision as of 09:39, 1 April 2019

Release info

Name: VSF-INCA
Description: VSF-INCA is a firmware archive for all INCA based Intercom stations including devices: IP Desktop Master Station, IP Substation, IP Vandal Resistant Station, IPARIO and IP Dual Display Station.
The firmware is delivered in two different ZIP archives:

A100G80200.02_09_X_X - Used for standard INCA IP Intercom devices
A100G802D0.02_09_X_X - Used for IP Dual Display Station

Version: 02.09.3.0
Date: 28.03.2019
Status: General Availability (GA)
Note: Release notes for the Video module component in IP Desktop Station with Video Display (1408001635) can be found in separate document on Vingtor-Stentofon AlphaWiki page IP Desktop with Video Display - Release Notes

Version 2.9.3.0

New Features

SNOW-496 IP Station support for RFC3891 SIP "Replaces" Header

The IP Station (Turbine and INCA) now support Reinvite / INVITE with replaces, which is quite common function used in SIP environments. The needed function is described in RFC3891.

SNOW-818 Keep-alive for improved VoIP NAT traversal

NAT keep-alive is a feature that sends very tiny UDP data packets from a VoIP client to the router to show that the port is still in use. Turbine and INCA are now sending keep-alives every 25 seconds if have enabled "NAT Keep Alive" under Call Settings.

SNOW-330 IP Multicast audio support for Pulse Intercom

Turbine and INCA IP intercom stations now support IP multicast audio when configured in Pulse mode. Previously, only SIP mode was supported. Up to 10 multicast IP addresses can be configured.

Bugfixes and Improvements

Security fixes and improvements

MTN-2102 Password on Pulse server Directory settings shown as plain text

Password on Pulse server Directory settings page was displayed as plain text. Now it is displayed as standard HTML password field.

Known Issues

MTN-1052 PTT does not work between Gateway and INCA station

Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA. If call is made between Turbine and Gateway, PTT works as expected.

MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C

When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.

MTN-817 IP Video Desktop does not indicate private/open mode

There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.

MTN-482 Transfer function doesn't work with Cisco CCM

When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.

MTN-598 IP station fails to register if Hebrew name is too long

More than 12 characters entered causes registration problems

MTN-268 Relay follow M-key cannot handle quick M

Relay configured to follow M-key does not handle quick press on M-key

@@ Line 49: / Line 49: @@
 ==== MTN-268 Relay follow M-key cannot handle quick M====
 Relay configured to follow M-key does not handle quick press on M-key
-== Version 2.8.3.0 ==
-=== New Features===
-==== SNOW-191 Support SIP Early Media during 180-Ringing or 183-Session Progress ====
-Support playing a media during SIP 180-Ringing or SIP 183 Call progress, instead of a locally generated ringing tone. This is a very common setup in iPBX systems where server shall generate a media to be played during session progress and before call is accepted (e.g. Call queued before answered). Note that we do not fully support RFC3960.
-==== SNOW-278 IP Multicast audio support for SIP Intercom ====
-Turbine and INCA IP intercom stations now support IP multicast audio when configured in SIP mode. Up to 10 multicast IP addresses can be configured.
-===Bugfixes and Improvements ===
-====SNOW-240 StationWeb - inconsistent location of Keyboard Settings page====
-Renamed the page to "Keyboard Settings" and moved it to SIP Configuration - for Pulse and SIP mode
 [[Category: Release notes]]