Difference between revisions of "IP-LCM"
From Zenitel Wiki
(→Configuration) |
(→Configuration) |
||
| Line 26: | Line 26: | ||
* [[SIP Intercom Configuration|SIP mode]] | * [[SIP Intercom Configuration|SIP mode]] | ||
| − | + | Device specific configuration for the IP-LCM: | |
* [[IP-LCM Configuration (AlphaCom mode)|AlphaCom mode]] | * [[IP-LCM Configuration (AlphaCom mode)|AlphaCom mode]] | ||
* [[Relay_Settings_(Edge)#Operating the relay of a Remote Device|Edge mode]] | * [[Relay_Settings_(Edge)#Operating the relay of a Remote Device|Edge mode]] | ||
Revision as of 11:50, 3 March 2020
The IP-LCM module is an expansion to the TKIS-2, and adds high power relays and robust control inputs to the kit without extra wiring.
DIN-rail mounting allows for a flexible I/O device that reduces the amount of wiring for I/O inside racks and other systems.
The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.
- 8 relay outputs
- 8 control inputs
- Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG
- Device powered via the TKIS-2 kit using PoE or local power
- All TKIS-2 features are available, including:
- 1 relay
- 6 inputs
Contents
Software requirements
The IP-LCM is fully supported as from ver 4.11.
Getting started
Configuration
General configuration:
Device specific configuration for the IP-LCM:
Restore Factory Defaults and Software Upgrade
Connectors, Indicators and Dimensions
Software Requirements
This station is fully supported as form AlphaCom version 11.2.3.7