Difference between revisions of "Flowire FCDC3 - Release Notes"
From Zenitel Wiki
(→Important information) |
(→Important information) |
||
| Line 27: | Line 27: | ||
=== Important information === | === Important information === | ||
====Interoperability with TFIX-1/2/3 and FCDC-1/2==== | ====Interoperability with TFIX-1/2/3 and FCDC-1/2==== | ||
| − | FCDC3 is compatible with FCDC1/2 including TFIX and Exigo Ex Access panels, but only after these devices have been upgraded to software version 4.1.3.13 or newer. See | + | FCDC3 is compatible with FCDC1/2 including TFIX and Exigo Ex Access panels, but only after these devices have been upgraded to software version 4.1.3.13 or newer. See [[FCDC-3_-_Backwards_compatibility]] for more information. In particular, in clusters with mix of FCDC1/2 and FCDC3, one FCDC3 must be set as "CCo". |
====IGMP snooping / multicast==== | ====IGMP snooping / multicast==== | ||
Revision as of 12:43, 20 May 2020
Contents
Version 1.0.3.2 (2020-03-17)
Release Info
- Name: vsf-fcdc3-1.0.3.2.zip
- Description: vsf-fcdc3-1.0.3.2_fs_kernel can be installed on FCDC3
- Version: 1.0.3.2
- Date: 17.03.2020
- Status: GA
- Upgrade: See Flowire Software Upgrade Procedure
Files included in vsf-fcdc3-1.0.3.2.zip:
- vsf-fcdc3-1.0.3.2_fs_kernel - For upload to web by users.
- vsf-fcdc3-1.0.3.2_flash_image_960333PLC_REF.w - Complete image for JTAG/SPI burning at production.
New version vsf-fcdc3-1.0.3.2
vsf-fcdc3-1.0.3.2 is the first version released for General Availability.
vsf-fcdc3-1.0.3.2 fixes interoperability with FCDC1/2 when multiple clusters(MTN-2853).
Several improvements has been made to the web interface. All relevant settings are now listed on the front web page. See Changes.txt in zip file for details.
For more information about FCDC3 SW and HW visit FCDC-3.
Known issues
The "Backup/Restore settings" function in the web only include a few of the settings.
Important information
Interoperability with TFIX-1/2/3 and FCDC-1/2
FCDC3 is compatible with FCDC1/2 including TFIX and Exigo Ex Access panels, but only after these devices have been upgraded to software version 4.1.3.13 or newer. See FCDC-3_-_Backwards_compatibility for more information. In particular, in clusters with mix of FCDC1/2 and FCDC3, one FCDC3 must be set as "CCo".
IGMP snooping / multicast
From vsf-fcdc3-1.0.3.1 IGMP snooping is disabled by default, and add web configuration for enable/disable IGMP snooping. IGMP snooping on FCDC3 only work properly with IGMPv3.
Interoperability with IMT
Upcoming IMT version 1.6.3.0 will support mass upgrade of FCDC3. vsf-fcdc3-1.0.3.0 is the very first version that support mass upgrade from IMT. FCDC3 devices with earlier un-released versions must be manually upgraded via the web.