MAC address (ICX and AlphaCom servers): Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
If the MAC address is to be used for instance for firewall rules, it is important to provide the IT-administrator with the correct MAC address. | If the MAC address is to be used for instance for firewall rules, it is important to provide the IT-administrator with the correct MAC address. | ||
[[Category: ICX-AlphaCom Platform]] | |||
[[Category:AMC Software]] | [[Category:AMC Software]] | ||
Revision as of 08:43, 11 May 2022
Each of the two ethernet ports in the ICX-500 or in the AlphaCom Servers has an unique MAC address. Zenitel has a MAC address range from 00:13:CB:00:00:00 to 00:13:CB:FF:FF:FF.
This MAC address is used by ethernet port 0 (Eth0). The MAC address of ethernet port 1 (Eth1) is generated by adding 80:00:00.
It is always the MAC address of Eth0 which is refereed to when dialing 789 on a display station, and in the web interface, System Monitoring > Node information and in System Configuration > Licensing. The MAC address of Eth1 is found in System Configuration > Interfaces.
If the MAC address is to be used for instance for firewall rules, it is important to provide the IT-administrator with the correct MAC address.