TA-10

TA-10 is a Relay Module to be used with Turbine Industrial stations TFIE-1 and TFIE-2, and the Turbine kits TKIE-1 and TKIE-2.

The TA-10 Relay Module

Highlights

• Designed for use with Turbine Industrial stations TFIE-x, and the Turbine kits TKIE-x
• Fits inside the TFIE Industrial stations (Bracket is included in the TFIE station)
• Dual high-power relays (DPDT)
• Up to 400VAC /48 VDC per relay
• Up to 8A current per relay
• Heavy-duty spring-loaded terminals with spare grounding terminals
• Powered by Turbine Industrial stations (TFIE-x) or Turbine Extended Kit (TKIE-x)

Connection

• Use the cable that comes with the TA-10, and connect one end to the Turbine Extended Board (Connector J2), and the other end to the TA-10 board as indicated in the drawing below

Connecting the TA-10 Relay Unit to a TFIE station or a TKIE kit

Configuration

Logical RCO 11 is mapped to the relay of the TA-10 unit on station 118

AlphaCom Mode:

• Use the AlphaPro tool, and go to Exchange & System > RCO
• The two relays must be mapped in the RCO table as pin 9 and pin 10
• See RCO - Remote Control Output for more details

SIP or Pulse mode:

• Log on to the web interface of the station
• Select SIP Configuration > Relay Settings, select Relay 3 or Relay 4, and configure which event should operate the relay
• See Relay Settings for more details

Dimensions

• Dimensions (WxHxD): 100 x 50 x 40 mm
• Weight: 0.1 kg

Related Information

• Additional Documentation on Zenitel.com