Difference between revisions of "School IP Intercom - 1402001000"
From Zenitel Wiki
(→Restore Factory Defaults and Software Upgrade) |
(→Configuration) |
||
| Line 12: | Line 12: | ||
General configuration. | General configuration. | ||
| − | * [[IP Station Configuration - ICX-AlphaCom mode]] | + | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] |
| − | * [[Adding station to existing system (Edge)| | + | * [[Adding station to existing system (Edge)|Edge mode]] |
| − | * [[SIP Intercom | + | * [[SIP Intercom - Web Interface|SIP mode]] |
| − | * [[IP Station Configuration - Pulse mode]] | + | * [[IP Station Configuration - Pulse mode|Pulse mode]] |
Station specific configuration for the School IP Intercom: | Station specific configuration for the School IP Intercom: | ||
Revision as of 13:40, 30 June 2022
|
This product is discontinued! |
Contents
Connections
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
Note that the off-line display menu is not available for the School IP Intercom, as the navigation buttons are not present on this station. The station must be configured via the web interface.
General configuration.
Station specific configuration for the School IP Intercom:
- Configuration of School IP Intercom station - AlphaCom mode
- Configuration of School IP Intercom station - Edge mode
- Configuration of School IP Intercom station - Pulse mode
- Configuration of School IP Intercom station - SIP mode
Restore Factory Defaults and Software Upgrade
- Reset to factory settings
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Software Release Notes
Connectors, Indicators and Dimensions
Accessories
- Surface-Mount Backbox for School IP Intercom (1402001010)
- Flush-Mount Backbox for School IP Intercom (1402001030)
Software Requirements
This station is fully supported as form AlphaCom version 10.50