Difference between revisions of "IP Flush Master -V2"
From Zenitel Wiki
(→Restore Factory Defaults and Software Upgrade) |
(→Configuration) |
||
| Line 12: | Line 12: | ||
General configuration: | General configuration: | ||
| − | *[[IP Station Configuration - ICX-AlphaCom mode]] | + | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] |
| − | *[[Adding station to existing system (Edge)| | + | * [[Adding station to existing system (Edge)|Edge mode]] |
| − | *[[SIP Intercom | + | * [[SIP Intercom - Web Interface|SIP mode]] |
Station specific configuration: | Station specific configuration: | ||
Revision as of 13:46, 30 June 2022
Contents
Getting Started
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
General configuration:
Station specific configuration:
- CRM V - Control Room Master (AlphaCom mode only)
- IP Flush Master - Call Queuing (SIP mode)
- Customized text on navigation buttons - ICX-AlphaCom mode
Restore Factory Defaults and Software Upgrade
- Restore factory default settings
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Software Release Notes
Connectors, Indicators and Dimensions
Accessories
- 1008097100 - Handset for IP Flush Masters
- 1008097500 - Gooseneck Microphone Kit
- 1008010100 - IP DAK-48 Unit
- 1008098600 - Onwall Back Box
- 1008098700 - Flush Master Back Box
- 1008098800 - Backbox for handset
- Headset
Software Requirements
This station is fully supported as from ICX-AlphaCom version 11.2.3.7