Difference between revisions of "Logging into an Zenitel IP Device"
From Zenitel Wiki
(→How to set a static IP Address on your Windows 10 computer) |
(→How to set a static IP Address on your Windows 10 computer) |
||
Line 55: | Line 55: | ||
<table style="max-width:80%; border-style: double; border-color: #c7c7c7;"> | <table style="max-width:80%; border-style: double; border-color: #c7c7c7;"> | ||
<tr style="rowspan:2;"> | <tr style="rowspan:2;"> | ||
− | <td style="display: block; vertical-align: bottom;">[[Image:PC StaticIP.PNG| | + | <td style="display: block; vertical-align: bottom;">[[Image:PC StaticIP.PNG|400px]]</td> |
</tr> | </tr> | ||
<tr> | <tr> |
Revision as of 11:15, 11 August 2022
Access the web interface of a Zenitel IP device with a standard web browser:
- Open a web browser
- In the browser’s address bar, type the IP address of the device and press the ENTER key
- - The login page will be displayed.
Connect the PC and the IP device to a network switch, and open a web browser to log in |
The login page |
To log into the device:
- Click on one of the login options
- Enter the default User name: admin
- Enter the default Password: alphaadmin
The Station Information page will now be displayed, showing the IP configuration and status.
Default IP addresses
- The Zenitel stations and devices are set to obtain IP address automatically from the network (DHCP). If no DHCP server present, it will get a random 169.254.x.x address The station will speak its own IP address when pressing the Call button, a Digit key a DAK key or activate an Input of the station.
- The previous generation (called INCA) of stations has default IP address 169.254.1.100.
How to set a static IP Address on your Windows 10 computer
In order to access the web interface of the station, your computer must be in the same subnet range as the device.
- Click Start, and type Control in the search field, then select Control Panel.
- Click on Network and Internet.
- Click on Network and Sharing Center.
- On the left pane, click the Change adapter settings link.
- Right-click the network adapter and select Properties.
- Select the Internet Protocol Version 4 (TCP/IPv4) option.
- Click the Properties button.
- Select the Use the following IP address option.
- Set the IP address (e.g., 169.254.1.90).
- Set the Subnet mask. (e.g., 255.255.0.0).
- Set the Default gateway. This address is typically your router’s IP address (e.g., 169.254.1.1).
- Click OK.
- Click Close again to close the network adapter properties.
Setting a Static IP Address on the laptop |
Once you’ve completed the steps, you can open your web browser and try logging into the device.