Difference between revisions of "ENA2060 Amplifier"
From Zenitel Wiki
(→Configuration) |
|||
| Line 6: | Line 6: | ||
*ENA2060-DC1 uses a 110 VDC power source | *ENA2060-DC1 uses a 110 VDC power source | ||
| − | *ENA2060-DC2 uses a 24-48 VDC power source | + | *ENA2060-DC2 uses a 24-48 VDC power source (Item Number: 1023122062) |
==Installation, Mounting and Dimensions== | ==Installation, Mounting and Dimensions== | ||
Revision as of 13:05, 27 June 2024
The ENA2060 Network Amplifier for Rolling Stock incorporates SIP-addressable loudspeaker loops that enable the use of the same software for handling both Passenger Emergency Intercom / Crew Communication and Public Address (PA), as well as the required Train Radio Integration, thus eliminating one entire subsystem from the solution.
This results in a well-integrated system with less complexity and more functionality, while the use of open standards offers freedom of choice when it comes to future upgrades and supply.
2 different ENA2060 models are available.
- ENA2060-DC1 uses a 110 VDC power source
- ENA2060-DC2 uses a 24-48 VDC power source (Item Number: 1023122062)
Contents
Installation, Mounting and Dimensions
Configuration
Software Upgrade
Software upgrade of the ENA2060 amplifier is done in the same way as Turbine Intercom stations.
Load Factory Default values:
- Factory Default values can be restored by shorting pins 7 and 13 in the Multi-Connector during boot and following the directions for TKIS Restore Factory Defaults
- Factory Default values can also be loaded via the web interface of the amplifier, from the Main > Recovery menu