Zenitel Client Installer

Prerequisites

Recommended system requirements:

Operating System	Windows 7 or higher
Hardware	CPU: Dual Core Intel Core or newer RAM: 4 GB Hard drive: 40 GB or better Modern integrated GPU with OpenGL 3.0 support Network card
Audio	Modern soundcard Speakers and microphone
USB Button (optional)	USB 2.0 support.

License requirements

• IC-Edge system: Using the Zenitel-Client in the IC-Edge system is license free, and supported for up to 10 units.

• Pulse system: A Zenitel-Client (formerly named VS-Client) Extension license (Item no. 1009661101) is required in the Pulse Server, and a Zenitel-Client account must be defined in the Pulse Server in order for the Zenitel-Client to register.

Zenitel-client account in Pulse Server

Installation

The Zenitel Client application includes a Windows Installer package named VingtorStentofonIntercom_1.x.x.x.msi that is used to install VS-Client on the PC (1.x.x.x being the current software version). The installer has a Setup Wizard that will guide the user through the installation procedure.

• Double-Click VingtorStentofonIntercom_1.x.x.x
  
• Click Next
  
• Check the Accept EULA box and click Next
  
• Optionally change the default installation location, and/or select to install optional components:
  • ZAP Service: ZAP (Zenitel Application Protocol) - Configuration and Event Hub. Is automatically started by default. Should only be used with VS-SDK for Pulse.
  • Intercom Service: Intercom (VoIP) Signaling and Audio Processing Module. Disabled by default. Should only be used with VS-SDK for Pulse.

• Click Next
  
• 
  Click Install
  
• Click Finish to complete the installation

Once installed, the Zenitel-Client application will be available in the Start Menu:

• All Programs > Zenitel > Zenitel-Client

The application data is stored under the folder:

• C:\ProgramData\Zenitel\EdgeAudioClient

VS-Client can be removed by running from the Start Menu:

• All Programs > Zenitel > Uninstall Zenitel-Client