Difference between revisions of "Backup"
From Zenitel Wiki
(→Backup from station) |
(→Backup from station) |
||
| Line 8: | Line 8: | ||
==Backup from station== | ==Backup from station== | ||
| − | '''7820 Backup''': | + | '''7820 Backup''': A copy of the running configuration is stored in the backup.bin file. <br> |
| − | '''7821 Master Backup''': The running configuration is stored in the backup.bin file. After | + | '''7821 Master Backup''': The copy of the running configuration is stored in the backup.bin file. After exchange reset or power on, the running configuration is restored from the backup file (backup.bin). When using this backup option, a master backup (7821) should be made every time the configuration is changed, if not the changes are lost after next reset or power on. |
Revision as of 16:15, 2 January 2008
A Backup of the running configuration on the AMC-IP board can stored on a file in the flash memory. The file, called backup.bin, survives autoload. A backup can be done by:
- dialling 7820 (or 7821) + M-key on a SuperUser station
- from AlphaWeb
Note: A backup.bin file is compatible within the same AMC Database version only, and cannot be used to restore the configuration. When upgrading the AMC software and the AMC Database versions are different, the running configuration will automatically be deleted and factory default settings will be generated. Before continuing you must create a backup of the running configuration by doing a GetAll operation from AlphaPro.
Backup from station
7820 Backup: A copy of the running configuration is stored in the backup.bin file.
7821 Master Backup: The copy of the running configuration is stored in the backup.bin file. After exchange reset or power on, the running configuration is restored from the backup file (backup.bin). When using this backup option, a master backup (7821) should be made every time the configuration is changed, if not the changes are lost after next reset or power on.