Difference between revisions of "IP Master Station Kit - 1008093000"
From Zenitel Wiki
(→Station Board Connectors) |
|||
| Line 24: | Line 24: | ||
===Station Board Connectors=== | ===Station Board Connectors=== | ||
| − | [[Image:P1,P2.jpg|thump| | + | [[Image:P1,P2.jpg|align="right" |thump|100pt]] |
{| border="0" | {| border="0" | ||
| Line 30: | Line 30: | ||
|width="70pt"| | |width="70pt"| | ||
|width="70pt"| | |width="70pt"| | ||
| − | |width=" | + | |width="500pt"| |
| + | |width="120pt"| | ||
|- | |- | ||
| − | |'''P1'''||colspan="2" | RJ45 LAN connector for 10/100 Mbit Ethernet connection. | + | |'''P1'''||colspan="2" | RJ45 LAN connector for 10/100 Mbit Ethernet connection.||rowspan="4"|[[Image:P1,P2.jpg|align="right" |thump|100pt]] |
|- | |- | ||
|colspan="3"| The station can be powered from this connection if the line supports Power over Ethernet (PoE).<br> | |colspan="3"| The station can be powered from this connection if the line supports Power over Ethernet (PoE).<br> | ||
| Line 54: | Line 55: | ||
|- | |- | ||
|} | |} | ||
| − | |||
| − | |||
==Related Articles== | ==Related Articles== | ||
Revision as of 14:27, 31 July 2009
Contents
Features
- Made for STENTOFON Critical Communication over IP (CCoIP)
- Supports full keyboard including direct access keys (DAK) and dynamic keys
- Supports handset and headset
- Superb audio quality
- 0dB (600 Ohm) output to Public Address
- Relay output for e.g. door lock control and tamper alarm input
- Dual Ethernet ports for connection of other IP devices
- Remote software upgrade, configuration and monitoring
Station Board Description
The IP Master Station Kit 100 8093 000 is delivered as a kit including board 8023, microphone and 2 x 6-pin plug-on screw terminals for local manufacturing of IP-CCoIP stations. The board is also used in STENTOFON standard IP flush mount master stations.
Connections
Station Board Connectors
| P1 | RJ45 LAN connector for 10/100 Mbit Ethernet connection. |
| |
| The station can be powered from this connection if the line supports Power over Ethernet (PoE). The connector has two LEDs in front where the right (R) indicates Ethernet speed and the left (L) verifies Ethernet link and traffic. (L and R seen from the connector side). | |||
| P2 | RJ45 connector for auxiliary equipment like IP camera, PC or a second IP station. | ||
| This port has not an individual IP address. It does not carry power for AUX equipment. | |||
| P3 | 6-pin plug-on screw terminal for external connections. | ||
| Pin 1/2 | Connect to 1.5 W loudspeaker. Typical impedance: 8 Ω Recommended impedance: 6-25 Ω. | ||
| Pin 3/4 | Internal NO relay contact for door lock control etc. | ||
| Pin 5/6 | Connect 24 VDC for station power if PoE is not used. Pin 6 is positive. | ||