Touchless sensor (w/ backbox)

Touchless sensor, item 2390020100

The Touchless sensor (item 2390020100) is an IR-sensor that connects to Turbine Compact stations and is used to activate calls with gesture recognition instead of pressing the call button.

Highlights

Input Voltage: 5V
Available contacts: Normally Open & Normally Closed
Sensor active time: 0,5 secs
Operating distance: 15cm
IP66

Connections

Connections are made to the switch using the supplied 5 pin plug.
Correct orientation of the plug is ensured by the connector locating guides.

Color code

Red - +5 Volt supply
Brown - 0 Volt supply
Green - Normally Closed
Blue - Common
Purple - Normally Open

Typical Application

Touchless sensor - general wiring

Use Case Examples

Touchless sensor wired to Input 1 on a Turbine station:

Touchless sensor - wiring example

Configuration on IC-Edge

To configure the Input select Edge Controller > System Configuration > Direct Access Keys.
Select Show/Hide Settings on the station you want to configure:

Input 1 configured to call number 13 when triggered

Configure the Input to Call To a directory number when activated.

More details can be found on Direct Access Key Settings.

Configuration on ICX-AlphaCom

TO configure the input to call a preconfigured number:

Select Users & Stations
Select the intercom station with the touchless sensor connected
Open the DAK window
Select the tab DAK 11-20
On DAK 11 (= input 1) enter the directory number to call when the input is activated